Misc hardware that is used on a variety of guitar brands & styles
If you reached this page via an Internet search engine please note:
A frame set with links to all our different sections should appear on the left of the screen.
If it's not there, log off and use: File/Open "www.GRGuitars.com"
to see our entire offering of instruments and repair parts.

Table of Contents

$20 minimum order before shipping
Neck plates & screws, plain & fancy strap buttons, strap locks, pickguard screws, fancy knobs

MKceltBC

More fancy knobs, see bottom of this page and clearance page.

Gunmetal Chrome Celtic dome Knot (1)
$11.95 each
MKceltG
Gold celtic knot dome knob
$11.95 each
NP600C#
Neck Plate-Chrome 4 hole with engraved 5 digit serial number, without screws. Sorry, no choice of numbers, example would be "54952" - for use to identify a guitar, not establish the year it was made.
7.95
NP600C#A
Aged Neck Plate- Chrome 4 hole with serial numbers, screws not included
12.95

NP99-1446

Fender neck plate with logo. 4 philips head screws included. Script says "Fender, Corona, California".

 

11.95

 

NP99-1446A
Aged Fender neck plate with Corona logo. 4 philips head screws included. 16.95

 

NP99-1449
Fender "F" logo neck plate, 4 philips head screws included 11.95


NP99-1499A
Aged Fender "F" logo neck plate, 4 philips head screws included 16.95

NP99-1445C

Fender Am. Ser. Chrome neck plate with 4 screws.

This neck plate has an extra smaller hole between the bottom two screw holes.

11.95
NP600C
Neck Plate-4 hole chrome, 4 phillips head screws included
6.95


NP600CA
Aged Neck Plate-4 hole chrome, 4 screws included 12.95


NP600-G
Gold Neck Plate-4 hole, screws not included-order below
9.95

NP600-GA
Aged Gold Neck Plate-4 hole, screws not included-order below
13.95

NP600-B
Black Neck Plate-4 hole , screws not included-order below
8.95


NP604CUS
Neck Plate cushion, 4 hole black plastic for guitar or bass 2.50


NPS05C
Chrome Neck plate screws-set of 4, phillips head, 1 3/4" long.
1.50


NPS05NA
Aged Nickel Neck plate screws- set of 4, phillips head, 1 3/4" long.
2.95

NPS05SS
Neck plate screws-Stainless set of 4, phillips head, #8 x 1 3/4" long. 1.50

NP306N
Slot head nickel neck plate screws-set of four. #8 x 1 3/4" long 2.45
NP306NA
Aged Slot head nickel neck plate screws-set of four. #8 x 1 3/4" long 4.95
NPS05G
Gold Neck Plate Screws (4) #8 x 1 3/4" 4.95

NPS05GA
Aged Gold Neck Plate Screws (4) 6.50

NPS05B
Neck Plate Screws-Black (4) 3.95

NPS305C
Short Neck Plate Screws, chrome phillips head 1 3/8" (4) 2.95


NPB5260C
Recessed Neck screw bushings, chrome 4 pieces (4) 3.95


SBskC
Chrome skull strap button set (2)
see clearance page
SLCfire
Q-Parts straplock chrome Firewheel
19.95
SLCsun
Q-Part straplock chrome Sun
19.95

SLC717
Natural Abalone/chrome strap lock set
List $26
22.95

SLS1101N
Pics & Info
Straplock System-Dunlop original slim button design, nickel. List $19.00 14.95

SLS1101NA
Straplock System-Dunlop original slim button design, aged nickel
(photo is a little darker than reality)
21.95
SLS1102BR
Straplock System-Dunlop original slim button design, brass. List $21.97
This color blends well with gold hardware.
15.95

SLS1102BRA
Straplock System-Dunlop original slim button design, Aged brass. 21.95
SCLHG

Schaller Straplock system-gold List $35

 

29.95
SCHNCK
Schaller-Fender Straplock system-Nickel List $16
13.95

SB670N
Nickel Strap Buttons-Set of 2, with screws 2.50

 

SB670N-Q6
6 Nickel Strap Buttons-Set of 2, with screws-Quantity discount-(6 sets@$2.15 each) 12.95
SB670NA
Aged Nickel Strap Buttons-Set of 2, with screws 4.95
SB670NA-Q6
Aged Nickel Strap Buttons-Set of 2, with screws-Quantity discount-6 aged sets 25.95
SB670-G
Gold Strap Buttons-set of 2,with screws
3.75
SB670-GA
Aged Gold Strap Buttons-set of 2, with screws
5.95
SB670-B
Black Strap Buttons-set of 2, with screws 3.75
PGS01N
Pickguard Screws-1 dozen, nickel, phillips head 1.95

PGS01NA
Pickguard Screws-1 dozen, aged nickel, phillips head for Fender type guitars, #4 - 1/2" long. 3.95

PGS01-G
Pickguard Screws-1 dozen, gold, phillips head, #4 - 1/2" long. 4.50
PGS01-GA
Pickguard Screws-1 dozen, lightly aged gold, phillips head, #4 - 1/2" long.
6.95
PGS-slot
Pickguard Screws-1 dozen slot head. #4 - 1/2" long. 2.95

PGS-slotA
Pickguard Screws-1 dozen aged nickel slot head, #4 - 1/2" long. 4.95
PGS-01BK
Pickguard Screws-1 dozen Black, #4 - 1/2" long. 4.25
EP654-G
Gold nut & dress washer for 1/4" jacks and pots, 1 of each.
1.95

All metal knobs have a set-screw on the side for adjustable fit and non-slip knurled or textured sides. They fit most pots on most guitars. They won't work for the top of a two piece concentric knob, though. To install on split shaft pots: Align set screw with the split in the pot shaft before tightening. On solid shaft pots such as Tele, you may have to remove the inside brass sleeve. Loosen the set screw with an allen wrench and pop the sleeve out of the inside of the knob. The inside diameter of all the knobs with pearl tops is 1/4"- the removable brass sleeve inside reduces the size. The appearance of each authentic shell & stone knob will vary slightly different

Measurements of dome/pearl or shell dome knobs:
A 20.00mm 0.787in B 15.45mm 0.608in C 14.60mm 0.575in D 6.00mm 0.262in

MKAPRC
Red acrylic pearl/chrome base
$7.95 each


each
MKASNC
Natural abalone shell/chrome base
$11.95 each
MKTurqC
One piece sold individually
Turquoise stone is slightly different on each knob.
11.95 each

MKAPWC
White acrylic pearl/chrome base
$7.95 each

MKAPWG
White acrylic pearl/gold base
$7.95 each

MKASNG
Natural abalone shell/gold base
$11.95 each
MKGAG
Natural green abalone/gold base
$11.95 each
MKSLPG
Leopard pearl cap, gold base

Would look fantastic with figured maple top. Each piece is a little different.
$11.95

each
MKSLPC
Leopard pearl cap, chrome base
$11.95
MKCEBUC
Catseye Blue

Chrome base-pearl top changes color depending on how the light hits it.
$11.95

MKAPBUC
Blue acrylic pearl, chrome base
$7.95


each
MKAPBKC

Black acrylic pearl, chrome base

$7.95


each
MKwestC
Chrome Western style (1)
All dome knobs above fit Strat, Tele & most other guitars.
11.95
MK Black Dome Knobs (1) with set screw
fits USA solid shaft pots (Tele, P or J Bass)
these are a solid black color, not like gunmetal black chrome used with pearl knobs
5.95

MK Gold Dome Knobs (1) with set screw
fits USA solid shaft pots (Tele, P or J Bass)
5.95


See Strat, Tele & Bass pages for more hardware kits

SINGLE CUTAWAY: Hardware for building a single cutaway guitar or if you are repairing an old Tele®.
Chrome-Nickel

SChrd10

 

DOUBLE CUTAWAY: Hardware for repairing a vintage style Strat® or building a double cutaway guitar.
Chrome-Nickel

DChrd20

Neck plate, with screws #NP600   Neck plate, with screws #NP600
Tuners, 6 in line Kluson style #TK780N   Tuners, 6 in line Kluson style
String Guide for Tele-style guitar   String T for Strat-style guitar #SG01S
Bridge-vintage 3 brass saddle Tele-style #TB020N   Trem bridge-vintage style #SB200N
Tele jack input cup #JP275TN   Strat jack plate, screws #JP610SN
Control plate-chrome #CP2058   2 strap buttons, 2 screws #SB670
9 pickguard screws   1 dozen pickguard screws
2 strap buttons, 2 screws #SB670  
2 Chrome knobs #MK115v10 barrel for the aged kit or chrome dome for the standard (as new)
6 string ferrules #SF087N