Replacement parts for Gibson and Epiphone guitars:
If you reached this page via an Internet search engine please note:
A frame set with links to different sections should appear on the left of the screen.
If it's not there, log off and use: File/Open "www.GRGuitars.com"
to see our entire offering of instruments and repair parts.
Table of Contents


Please bookmark GRGuitars.com or add to your favorites list. Thanks, your business is appreciated. When visiting our website please "refresh" your browser to see all our new offerings.

Thanks to Sandy Carter, former Gibson guitar rep for help with this section.
Aged hardware takes 3-7 days
For Gibson brand pickups as well as Seymour Duncan-check out our pickup page
BN2804S
Slotted Bone nut for Gibson. 1 3/4" long, x 3/16" x 3/8" beveled top. 1 piece.
Fits 1 5/8" nut slot
See metric page for Epi nut.

5.95
PN872-P
Plastic nut for Les Paul-slotted, 1 piece
1-11/16" x 9/32" x 7/32"
1.95
BN833BR
Brass nut for Les Paul 1 11/16" x 5/16" x 3/16"
Preslotted. One piece
9.95
BN833GR
Slotted Graphite nut 1 11/16" x 5/16" x 3/16" for Gibson. One piece
5.95
BN204
Bone nut blank-for Gibson. Oversized, shape to fit: Slant cut, 2 1/16" x 3/8" x 1/4" One piece.
4.95
SD90SLN
Historically used on:
1956 - 1959 Gibson® ES-175
1956 - 1959 Gibson® Les Paul Standard 1959 Epiphone® Crestwood Custom
1959 Epiphone® Broadway
1958 - 1959 Gibson® ES-335 1958 - 1959 Gibson® EDS-1275 Double 12/6 double neck (3 sets needed)
1958 - 1959 Gibson® EMS-1235 Double Mandolin 6 string guitar/mandolin double neck (2 sets needed)
1959 Gibson® EB-6
1956 - 1959 Gibson J-160E
1952 - 1959 Gibson® J-185

Authentic Kluson individual (not on a plate) 3 on a side nickel w/pearl button, direct replacement for vintage Gibson Les Paul, SG, 335 and other guitars, as well as most current re-issue 50's and 60's Gibson® guitars. 6 press fit bushings and screws included.
Also used on the Epiphone Casino® and current Epiphone production of Les Paul® and SG 400® models.
List $60
55.95


TKSD90SLNA
3/side nickel w/pearl buttons. Lightly "Aged" to appear used. Authentic Kluson replacement for vintage Gibson guitars, direct replacement for the original.
79.95


SD90SLG
Authentic Kluson 3/side gold w/plastic pearl keystone style buttons. Includes press fit bushings and mounting screws. Replacement for vintage Gibson guitars, direct replacement for the original.
78.95

WD90NPP
Historically used on:
1956 - 1964 Kay® Guitars
1956 - 1964 Gibson® LG-1, LG-2 & LG-3 1956 - 1964 Gibson® J-45
1956 - 1964 Gibson® J-50
1956 - 1959 Gibson® CF-100E
1956 - 1964 Gibson® ES-125
1956 - 1964 Gibson® ES-140
1956 Gibson® ES-150
1956 - 1961 Gibson® Les Paul Junior 1961 - 1963 Gibson® Les Paul Jr /SG Jr
1963 - 1964 Gibson® SG Junior 1956 - 1959 Gibson® Les Paul Special
1960 - 1961 Gibson® Les Paul/SG Special
1960 - 1964 Gibson® SG Special
1959 - 1964 Gibson® Melody Maker 1962 - 1964 Gibson® B-25
1958 Gibson® LG-0
1958 - 1964 Epiphone® Cortez
1958 - 1964 Epiphone® Century 1958 - 1963 Epiphone® Wilshire
1958 - 1963 Epiphone® Coronet
1958 - 1964 Epiphone® Texan


Authentic Kluson 3 on a plate. Nickel with off-white plastic button, replacement for vintage Gibson guitars, such as Melody maker, Les Paul, Jr, SG, Jr-direct replacement for the original. Set of two strips. Includes press fit bushings and screws.
Total center to center distance of all 3 posts - 2 3/4 in., center to center distance between posts - 1 3/8 in., length of baseplate- 4 1/4 in., post height - 1 in., drilled post, single hole, post dia. 6 mm (.236 in.) Post spacing: measured center to center between outside post-2 3/4".
List $60
55.95


WD90NPPA

3 on a plate. Nickel with off white plastic button. "Aged" to appear used. Authentic Kluson replacement for vintage Gibson guitars, direct replacement for the original. Set of two strips, left & right, includes press fit tuner bushings & screws.
Key dimensions- total center to center distance of all 3 posts - 2 3/4 in., center to center distance between posts - 1 3/8 in., length of baseplate- 4 1/4 in., post height - 1 in., drilled post, single hole, post dia. 6.3 mm (1/4 in.)
79.95

SD9005MNP
Authentic Kluson nickel 3 x 3 individual tuners, with off-white plastic button, replacement for vintage Gibson guitars, such as ES330, vintage Epiphone Casino. Replacement for the original. Includes press fit bushings and screws. "Kluson Deluxe" stamped in a single line down each casing.
55.95

SD9005MNPA
Lightly aged Authentic Kluson nickel 3 x 3 individual tuners, with off-white plastic button, replacement for vintage Gibson guitars, such as ES330, vintage Epiphone Casino. Replacement for the original. Includes press fit bushings and screws.
74.95
SD90SLNdr
Historically used on:
1965 - 1969 Gibson ES-175 1965 - 1969 Gibson ES-335 1968 - 1969 Gibson ES-340 1968 - 1969 Gibson ES-150 1968 - 1969 Gibson Les Paul Gold Top 1969 Gibson Les Paul Deluxe (early 1969) 1965 - 1969 Gibson SG Standard 1965 - 1969 Gibson EDS-1275 Double 6/12 (3 sets needed) 1965 - 1969 Gibson EMS-1235 Double Mandolin/Guitar (2 sets needed) 1965 - 1969 Gibson EBS-1250 Double Bass/6 string guitar (1 set needed) 1966 - 1969 Gibson Flying "V" (1st issue) 1965 - 1969 Gibson Barney Kessel Regular 1965 - 1969 Gibson J-160E 1965 - 1969 Epiphone Broadway 1965 - 1969 Epiphone Howard Roberts Standard 1965 - 1969 Epiphone Riviera (used on a few examples)

Authentic Kluson Nickel Les Paul-Style keys-Plastic "double ring" Keystone knobs. List $65. Casing is stamped" Kluson Deluxe" in a double row.
3 per side set of Kluson® tuning machines used on vintage Gibson® models such as the Les Paul®, SG®, 335® and others. Also used on the Epiphone Casino® and current Epiphone production of Les Paul® and SG 400® models. This model Kluson® tuning machine is also a direct replacement for most current re-issue 50's and 60's Gibson® production and other series that utilize a vintage style individual tuning machine. These are six individual tuners, 3 per side(not on a plate). All hardware including bushings and mounting screws are included in the set.

Press fit bushings-Check your guitar carefully-press fit bushings are not interchangeable with the larger screw-in type.

61.95
SD90SLNdrA

Lightly aged to look old. Authentic Kluson nickel "double ring" pearl button. Includes press fit bushings & mounting screws. See specs, above.

 

81.95
SD90SLNdrSL

Authentic Kluson Nickel Les Paul-Style keys-Plastic "double ring" Keystone knobs. List $65. Casing is stamped" Kluson Deluxe" in a single row.

Press fit bushings-Check your guitar carefully-press fit bushings are not interchangeable with the larger screw-in type.

61.95
SD90SLGdrSL
Authentic Kluson gold "double ring" pearl button. Press fit bushings. Authentic Kluson stamped in a single row on casing
$85.95
SD90SLGdr

Authentic Kluson gold "double ring" pearl button. Press fit bushings. Authentic Kluson stamped in a double row on casing

List $95.00

$85.95
Adapter Bushings-Turns holes in neck from mini-tuner size to accept smaller vintage post keys, such as Kluson's, See Tuning Machine page
The part that goes through the tuner hole in the neck has an outside width of 3/8". Converts mini Gotoh, Schaller or Grover pegholes to fit 1/4" diameter string posts.

 

TK771drN

Les Paul-Style machine head set, 3 x 3. Plastic "double ring" Keystone knobs, nickel with screw-in bushings (NOT press fit) gear ration is 16:1. This style was used on the ES and other Gibsons after 1960. German made by Schaller, high quality. The screw holes measure 15/16" center to center on each key. List $80
68.95


TK771drA
Les Paul-Style keys-Plastic "double ring" Keystone knobs, "aged" nickel with screw-in bushings 16:1. Used mid 60's thru late 70's on ES series
86.95


TK771drG
Les Paul-Style keys-Plastic "double ring" Keystone buttons have a greenish tint, gold with screw-in bushings 16:1. Used mid 60's thru late 70's on ES series.
77.95


PMMH-040

Gibson brand
Historic Specs

Gibson brand vintage Les Paul Pearloid machine heads. 3 on a side, nickel, with push-in bushings & mounting screws. Historic specs. List $135.
94.95
MH010
Gibson brand

Gibson brand original replacement machine heads-vintage nickel with greenish pearloid buttons. Screw in Bushings. Casing is stamped "Gibson Deluxe" in two lines. List $114. These tuners fit neck hole size .391 or 25/64th.

79.95


MH020
Gibson brand
Gibson brand original replacement machine heads-vintage gold with greenish pearloid buttons. Screw in Bushings. Casing is stamped "Gibson Deluxe" in two lines. List $104. These tuners fit neck hole size .391 or 25/64th.
88.95


MH-015
Gibson brand
Nickel modern style
Modern Gibson brand machine heads with metal nickel buttons. *May take up to a week to ship. List $99
88.95

MH-025
Gibson brand
gold modern style
Modern Gibson brand machine heads with metal gold buttons. *May take up to a week to ship. List $99
*May take up to a week to ship.
89.95

TK133N
Grover 3 x 3 vintage syle kluson tuners, nickel button, stamped "Grover Deluxe" in two rows. Press fit bushings and screws. Neck tuner hole size .359 = 23/64 drill bit. List $57
45.95
TK135N

Les Paul-style 3-on-a-side Grovers. Pearloid tulip button with slightly greenish tint, screw in bushings. Set of 6, die cast nickel, 14:1 gear ratio.
Neck tuner hole size .391 = 25/64 drill bit. List $65

52.95
TK135NA
Aged Les Paul-style 3-on-a-side Grovers. Pearloid tulip button, with screw-in bushings. Set of 6, nickel, 14:1. Aged to look old.
69.95
SD9105MP
6 in line Authentic Kluson tuners with white plastic buttons, bushings and mounting screws included. List $60
55.95
SD9105MPA
Lightly aged 6 in line Authentic Kluson tuners with white plastic buttons, bushings and mounting screws included.
75.95

WD90NPM
Authentic Kluson nickel 3 on a plate with metal buttons. Includes press fit bushings and scews. Replacement for Gibson Melody Maker, Les Paul, jr, SG, jr
55.95
WD90NPMA
Aged Authentic Kluson nickel 3 on a plate with metal buttons. Replacement for Gibson Melody Maker, Les Paul, jr, SG, jr. Press fit bushings.
75.95
SK900SLG/M
Historically used on: 1968 - 1975 Gibson ES-355 1968 - 1971 Gibson Crest Gold 1968 - 1975 Gibson Les Paul Custom 1963 Gibson Les Paul / SG Custom 1964 - 1975 Gibson SG Custom
Gold Waffleback Authentic Kluson tuners. 3 on a side, gold metal keystone buttons.
List $150.00
Dimensions: post diameter - 1/4 in. (.25 in.) set screw distance(on center) - 1 1/16 in. (1.065in.) housing width - 21/32 in. (.65 in.) housing length - 1 23/64 in. (1.35 in.) ferrule O.D. - 11/32 in. (.35 in.)
115.95
SK900SLG/MA
Lightly aged Gold Authentic Kluson Waffleback tuners. 3 on a side, gold metal buttons.
135.95
TK971C
Chrome 3 x 3 Schaller tuners with screw in bushings and mounting screws. 14:1 Made in Germany. List $105
89.95
TK7901C

Grover Rotomatics with metal keystone buttons. Chrome 3 x 3. Screw in bushings & mounting screws included. Fits neck hole size .391 or 25/64th. List $65

53.95
TK102-C
Chrome Grover Original Rotomatic 3 x 3 nickel, 14:1 gear ratio Neck tuner hole size .391 = 25/64 drill bit. List $68
52.95

 

TK102N

Nickel Grover Original Rotomatic 3 x 3, 14:1. Neck tuner hole size .391 = 25/64 drill bit. List $65

50.95
TK102NA
Lightly aged

Grover original Rotomatic 3 x 3, nickel 14:1
Aged

69.95
TK7562C
Economy 3 on a side chrome tuner set with screw in bushings and mounting screws.
 
TK780G
Tuning Keys-Kluson-style Gold six in line, with screws 14:1
34.95
TK780-GA
Tuning Keys-Kluson-style Gold six in line, with screws 14:1
"aged" to appear old.
49.95
TKSD9005MGA
Lightly aged Authentic Kluson 3/side gold tuners-see above.
90.25

SD9005
Historically used on: 1962 - 1964 Epiphone® Riviera 1962 - 1964 Epiphone® Professional 1961 - 1964 Martin® "F" series electrics 1956 - 1964 Martin® D-18 1956 - 1964 Kay® electric models (varied) 1956 - 1964 Rickenbacker® electrics (varied)
Authentic Kluson 3/side nickel. Authentic direct replacement for vintage Gibson ES330, Epiphone Casino & others. Press fit bushings, screws included. Set of 6. Nickel plated metal buttons.

55.95

TKSD9005NA
Lighlty aged Authentic Kluson 3/side nickel, individual keys. Authentic direct replacement for vintage Gibson guitars, originally used on ES330/Epiphone Casino & others. Press fit bushings, screws included.
Nickel plated metal buttons.
73.95
Pickups-See Pickup and Electronic pages
Bridges for Gibson
Most replacement parts for old Gibson & Epiphone guitars are not available from the manufacturer. Aged hardware takes 3-7 days

GBAVR2

Engineered to stop bridge movement or "wiggle" to stay in tune better.
Tune-O-Matic Bridge Thread = 6/32 US Thread (ABR1 Thread)
Post to Post Spacing = 2.91 Inches / 73.75mm Saddle
Radius = 12 inch

 

Tone Pros bridge-Nickel, old style. 2" string spacing. No string slots in individual saddles. Bridge mechanism is manufactured to very tight tolerances for extra sustain. Lubrication of saddle mechanism prior to adjustment or use is recommended. Thread = 6/32 US Thread (ABR1 Thread) Post to Post Spacing = 2.91 Inches / 73.75mm. Replacement for Gibson bridge.

List $65
$55.95
GBAVR2A
Lightly aged Tone Pros bridge-Nickel, old style. 2" string spacing.
$75.95

AVR2/G

Engineered to stop bridge movement or "wiggle" to stay in tune better.

 

Tone Pros bridge-Gold, old style. 2" string spacing. No string slots in individual saddles. Bridge mechanism is manufactured to very tight tolerances for extra sustain. Lubrication of saddle mechanism prior to adjustment or use is recommended. Thread = 6/32 US Thread (ABR1 Thread) Post to Post Spacing = 2.91 Inches / 73.75mm. Replacement for Gibson bridge. List $70
List $65
$62.95
T3BP-N
Locking version of the standard Tune-O- Matic bridge that secures solidly to your guitar and won 't come loose or fall out when the strings are out.
TonePros standard tune-o-matic bridge, Nickel. Small posts. String slots in individual saddles. " This TonePros System II bridge is the same as installed on new guitars direct from the factory and will look identical to your stock piece because it 's made from the actual OEM bridge used on your guitar, but the new version locks in solid creating perfect intonation and singing sustain. You won 't believe the difference, and you will never go back! This model fits Gibson Les Paul, SG, 335, as well as most other USA Made Guitars. Thread = 5mm Metric (as used by Gibson on Nashville Models) Post to Post Spacing = 2.93 Inches / 74.5mm
Radius = 12 inch
String Spread = Approx. 10.4mm
Post Top Width = .15 Inches/ 4mm • Center To Center Spacing: 2.913 "", But With A Slightly Larger Hole To Accommodate Any Difference • Saddle Spacing: 10.4 Mm"
$55.95
T3BP-NA
Lightly aged nickel TonePros standard tune-o-matic bridge. Small posts. String slots in individual saddles.
$75.95
GB520N

Vintage-style Tunematic Bridge, nickel w/mounting hardware. 2 29/32" post spacing, 2" string spacing.
Wheels are nickel, not gold like they appear in the photo.

29.95
GB520NA
Vintage-style Tunematic Bridge, nickel w/mounting hardware 2 29/32" post spacing-"lightly aged" to look old.
40.95
GB2585-C-
Chrome Tunematic bridge with height adjustable saddles 2 29/32" post spacing.
58.95
BR010
Gibson brand
Gibson brand bridge-Chrome ABR-1
List $75


62.95
BR015
Gibson brand
Gibson brand bridge-Nickel ABR-1
List $75


62.95
BR015A
Gibson brand
Gibson brand bridge-Nickel ABR-1, aged to look old. Includes wire, mounting studs & wheels



84.95
BR020
Gibson brand

Gibson brand bridge-Gold ABR-1

List $90

74.95
BR020A
Gibson brand
Gibson brand bridge-Gold ABR-1, lightly aged to look old


96.95
BR030
Gibson brand

Gibson brand bridge-Chrome Nashville Tune-O-Matic. This bridge is a little wider (about 9/16") than the standard ABR.
List $82

72.95
BR-059
Gibson brand
Nickel Gibson brand Historic non-wire ABR-1 bridge. Used on Gibson guitars made before 1963. Saddles are unnotched. Lettering on base of bridge is "GIBSON ABR-1" in raised letters. Includes posts and wheels. List $99
89.95
BR-059A
Gibson brand
Lightly aged Nickel Gibson brand Historic non-wire ABR-1 bridge. Used on Gibson guitars made before 1963. Saddles are unnotched. Lettering on base of bridge is "GIBSON ABR-1" in raised letters. Includes post and wheel set.
109.95
AVT2G-N
TonePros nickel wrap-around bridge. Fits vintage Gibson guitars with one-piece wraparound bridge, or any US guitar that uses this type of bridge. US thread studs. Fully intonatable. Post spacing, center to center is 82mm or 3.228" List $130.00

119.95

AVT2G-NA
Lightly aged TonePros nickel wrap-around bridge. Fits vintage Gibson guitars with one-piece wraparound bridge, or any US guitar that uses this type of bridge. US thread studs. Fully intonatable.
Includes studs and inserts.
139.95

TP-070
Gibson brand nickel Lightning Bar, wrapround compensating bridge/tailpiece. List $208
*May take up to a week to ship.
166.95
EP525C
See our Metric webpage for a complete listing of all parts we carry for import guitars
Replacement for Epiphone and other guitars that have large mounting holes: Chrome Tunematic bridge-2 1/16" string spacing. 2 29/32" post spacing, posts (about 1/2" wide) sized for large mounting holes.
26.95
GB510G
S.G. style gold Tunematic bridge 2" string spacing, 2 29/32" post spacing. Post (threaded part that goes into the insert) measured with caliphers is 7 mm, insert (part that goes into the guitar) measure 12 mm. List $60
Outside dimensions of the bridge are 88.7 mm long and 26.3 mm wide.
$56.95

GB510C



S.G. style chrome Tunematic bridge 2" string spacing, 2 29/32" post spacing. Post (threaded part that goes into the insert) measured with caliphers is 7 mm, insert (part that goes into the guitar) measure 12 mm. Outside dimensions of the bridge are 88.7 mm long and 26.3 mm wide.
List $56
$48.95
GBP94N
Nickel Studs & wheels set (2 each) for old style tunematic bridge. Fits Gibson reissue/replacement ABR bridge #BR015.
#6-32 x 1 1/16"

8.95

GBP94G
Gold Studs & wheels set (2 each) for old style tunematic bridge. #6-32 x 1 1/16"
12.95
GBP390C
Chrome stud and wheel set (2 each) for Gibson Nashville tunematic bridge
9.95
GB337N
Nickel replacement intonation screws.
6 pieces. These work with the nickel or nylon tunematic saddles listed below. They fit Gibson brand ABR #BR015
6.95
GBP535N
Nickel replacement tunematic saddles for USA Gibson ABR. Set of six saddles, screws so separately.
17.95
GBP535G

Gold replacement tunematic saddles for USA Gibson ABR. Set of six saddles only, no screws.
Looks the same as the discontinued saddles shown above.

$19.95
GBP535-Ny
Nylon replacement tunematic saddles for USA Gibson ABR. Set of six saddles
$21.95
GBP305C
Chrome Nashville bridge replacement saddles with screws & clips. Set of 6
$23.95
GB118
Replacement retaining, intonation screw wire for tunematic ABR style bridge. 1 piece.
$1.95
Stop Tailpiece
Many replacement parts for old Gibson and Epiphone guitars are not available from the manufacturer. If packaged and distributed by Gibson it will be indicated in the description. Gibson brand stop tailpieces do not have the "Gibson" stamp on the back.
Aged hardware takes 3-7 days
TP455N
Studs and anchors for Gibson stop tailpiece. USA threads, insert 5/16" anchor fits 1/2" hole in body
$14.95

TP456N

Tone Pros System II Nickel SNS/NKL steel studs and anchors for stop tailpiece. Fits Gibson 5/16" x 24.

Tone Pros Nickel SNS1-N studs & anchors fits Gibson stop tailpiece, set of 2. 5/16" x 24 List $35

$31.95
TP456NA
Lightly aged Tone Pros Nickel SNS1-N studs & anchors fits Gibson stop tailpiece. 5/16" x 24
$39.95
T1ZSN
Locking version of the US thread stop tailpiece that secures solidly to your guitar and won 't come loose or fall out when the strings are out.
Tonepros standard nickel tailpiece. Fits Gibson Les Paul, SG, 335 & more.
US/Imperial Thread = 5/16 – 24 US Thread
Stud to Stud Spacing = 3.22 inches/ 82mm Tailpiece Material = Zmac Stud Material = Brass Stud Cap Size = 13mm/.5in
3.25 inches Center-to-Center Stud Spacing
$47.95
T1ZSNA
Lightly aged Tonepros standard nickel tailpiece. Fits Gibson Les Paul, SG, 335 & more.
$67.95
TP010
Gibson brand

Gibson brand Tailpiece-Chrome Stop Bar
List $60.00

54.95

TP015
Gibson brand

Gibson brand Tailpiece-Nickel Stop Bar
List $60.00

54.95

TP015A
Gibson brand

Gibson brand Tailpiece-Lightly aged Nickel Stop Bar.

74.95
TP020
Gibson brand
Gibson brand Tailpiece-Gold Stop Bar
List $65.00

Gibson brand stop tailpieces do not have the "Gibson" stamp or logo on the back.
59.95
TP020A
Gibson brand
Gibson brand Tailpiece-Gold Stop Bar-Aged to look old.
79.95
Featherweight bridges are noticably lighter weight.
PTTP060
Gibson brand
Gibson brand nickel Historic lightweight aluminum tailpiece. List $233

$169
PTTP060A
Gibson brand
Lightly aged Gibson brand nickel Historic lightweight aluminum tailpiece. Actual color is somewhere between the first and second photo. The tailpiece is not rusty, but instead is not evenly shiny like a new one, more "foggy" looking.



The aged version of this tailpiece is considered a custom order and may not be returned for a refund.
$199
TP3406N
Stop Tailpiece-Aluminum featherweight nickel, USA thread studs & anchors 3-1/4" spacing. Made in Japan. Noticeably lighter than the Gibson or standard tailpieces. Replacement for Les Paul. List $50

42.95
TP3406NA
Stop Tailpiece-Aluminum featherweight nickel, USA thread studs & anchors 3-1/4" spacing-Lightly aged to look old.

62.95
TP3406G
Stop Tailpiece-Featherweight gold, USA thread studs & anchors 3-1/4" spacing. Made in Japan. Noticeably lighter than the Gibson or standard tailpieces. Replacement for Les Paul.

52.95

TP400-C


List $32
Stop tailpiece-Chrome 3 1/4" spacing, threaded studs & anchors for USA Gibson style solid body guitar. Gotoh brand.
26.95
TP401NK
Compensated Stop tailpiece-Nickel USA thread studs & anchors.Wrap around style as used on late 50's and 60's Specials or Juniors. Post size outside diameter 5/16" - Insert outside diameter 1/2" -Insert inside diameter .275. 2-1/16" string spacing, 3-1/4" stud spacing, 12" radius, Mounting stud threads 5/16" -24
26.95
TP401NKA
Lightly aged compensated Stop tailpiece-Nickel USA thread studs & anchors 3 1/4" stud spacing. Wrap around style as used on late 50's and 60's Specials or Juniors. Post size outside diameter 5/16" - Insert outside diameter 1/2" -Insert inside diameter .275
41.95
TP3405NK
Stop Tailpiece with adjusting set screws-USA studs and anchors, nickel 3 1/4" spacing. Used on 1950's Les Paul Jr.
25.95
TP3405NKA
Aged Stop Tailpiece with adjusting set screws-USA studs and anchors, nickel 3 1/4" spacing. Used on 1950's Les Paul Jr and other Gibson Guitars-aged to look old
40.95
TP3407NK
Featherweight Stop Tailpiece with adjusting set screws-3 1/4" stud spacing. Used on 1950-60's Les Paul Jr and other Gibson guitars.List $62
54.95
TP3407NA
Aged Featherweight Stop Tailpiece with adjusting set screws-3 1/4" stud spacing. Used on 1950's Les Paul Jr and other guitars-lightly aged to look old
74.95
TP1Z-N
This tailpiece has slightly narrower post to post spacing than standard.
Tonepros locking nickel metric tailpiece with studs & anchors.
Fits Epiphone Les Paul, SG, & 335
Stud to stud spacing - 3.22 inches/82 mm
Thread - 8mm x 1.25
49.95
TP3445C
Economy Stop Tailpiece-Chrome, metric studs & anchors, 3 1/4" stud spacing for import guitars. Replacement for Epiphone
14.95
TP5440-C
12-String Stop Tailpiece-Chrome, USA threads, studs & anchors, 3 1/4" stud spacing

24.95
GB501-OE1
Archtop Bridge-Compensated ebony bridge fits Gibson ES 175 and others-6" long. See Acoustic page for more choices. List $32

27.95
PBBR-055
Gibson brand
Gibson brand nickel ABR-1 tuneomatic with rosewood footed base and thumb wheels

List $99
79.95
PBBR-060
Gibson brand
Gibson brand gold ABR-1 tuneomatic with rosewood footed base and thumb wheels.
List $109

89.95
Electronics - Minimum order $20
See electronics page for add'l choices

GWkitGS

Retail value: $49

Gibson type-standard pots Wiring Kit-Includes: Switchcraft 1/4" jack, 4' feet braided, sheilded, vintage style wire, medium length 3-position Switchcraft switch w/screws #67, black switch knob, four 500 CTS standard shaft pots (#EP086) two .02 caps.

This kit is appropriate for thinner bodied guitars such as ES335, etc.

42.95

GWkitGL

 

Retail value: $60

Gibson type-long shaft pots Wiring Kit-Includes: Switchcraft 1/4" jack, 4' feet braided, sheilded, vintage style wire, tall 3-position Switchcraft switch w/screws, cream switch knob, four 500 CTS long shaft pots (#EP0686) two .02 caps. For carved top Les Paul.
49.95

GWkitSG

Retail value: $49

Gibson SG type-standard pots Wiring Kit-Includes: Right angle 3-position Switchcraft switch w/screws, Switchcraft 1/4" jack, 4' feet braided, shielded, vintage style wire, black switch knob, four 500 CTS standard shaft pots (#EP086) two .02 caps. We include 48" of wire instead of 2' as most others do. 42.95

EP086
500K audio pot, CTS split, knurled shaft with nut, lock and dress washer. Used for Gibson SG and some Historics. Shorter shaft than 0686 below.
5.45
500k Pot Height Comparison:
Far left #EP086, Middle #EP0686 or #EP-PAT500, Right: #EP286 push/pull
EP686
500K CTS audio pot, threaded section of shaft is 3/4" long. About 1 5/8" tall from bottom of base to top of split shaft. Long shaft for Gibson Les Paul or guitars with thick tops
7.95
EP-PAT500
Gibson brand
Gibson brand Potentiometer-500K ohm Audio Taper, long shaft. About 1 5/8" tall from bottom of base to top of shaft. List $14

12.95
EP-PAT510
Gibson brand
Gibson brand Potentiometer-500K ohm Audio Taper, short shaft. List $14

12.95
EP-PPAT-059
Gibson brand
Historic Specs
Gibson brand Historic Potentiometer-500K ohm Audio Taper, short shaft. List $15
12.95
PPAT310
Gibson brand
Gibson brand Potentiometer- 300K ohm Linear Taper, short shaft.

12.95
PPAT300
Gibson brand
Gibson brand Potentiometer- 300K ohm Linear Taper, long shaft.
12.95
PPAT-520
Gibson brand 500k push pull pot, short shaft
. List $28
23.95
EP4286
500k Long shaft, 3/4" bushing, push pull pot. 1 piece. 10.95
GW820
Wire -Vintage Gibson Style with braided shield-4 feet
3.95
Switch Height Comparison:
Left #EP4367 or #EP020, Middle #EP067 Right #EP066
Fits 1/2" diameter mounting hole.
EP4367
Straight tall toggle switch with black knob, Switchcraft
18.95
EP436G
Gold Straight tall toggle switch with black knob, Switchcraft
19.95
TS010
Gibson brand
Gibson brand right angle "L" toggle switch with cream knob. List $26
21.95
EP020
Gibson brand
Gibson brand tall straight toggle switch with creme knob. List $45

31.95
EP067
Medium Straight toggle switch with black knob. About 2 1/4" from base to top of knob. 14.95
EP066
Short Straight toggle switch chrome with black knob. About 2" from base to top of knob. 12.95
EP66G
Short Straight toggle switch gold hardware with black knob. About 2" from base to top of knob. 14.50
EP55
1/4" Input Jack-high quality Switchcraft brand, includes nut and washer
2.95
EP55G
Gold 1/4" Input Jack-high quality Switchcraft brand, includes nut and washer.

4.45
Pickup Rings & Covers
RE: Humbucker mounting rings-all those listed below have the same screw hole spacing and are the same size. Screw hole spacing on the long size is about 3 7/32" measured from the center of one hole to the center of the other
. Gibson pickup rings and covers will not fit Epiphone guitars.
See our Metric Parts Page
The Creme/Cream color on Gibson plastics will vary.
 
PRPR-15C
Gibson brand
Creme Gibson brand pickup mounting ring with screws-1/8" neck, slanted. 1 piece. List $11
8.95
PRPR-25C

Gibson brand
Creme Gibson brand pickup ring with screws-3/8" bridge, slanted. 1 piece. List $11
8.95
PRPR-035

Gibson brand Historic Specs
Historic Creme Gibson brand pickup ring set with nickel screws. 1/4" neck, 1/2" bridge
List $37
32.95

PC733C
When installing slanted pickup
rings, the taller side faces the
bridge.
These are flat on one side of each ring and curved on the other.
Cream Humbucking ring set-curved bottom, slanted sides for carved top Les Paul, set of 2. One each of 1/8" side height and 3/8" height.
Outside dimensions: 3 1/2" by 1 3/4" Inside opening dimensions 2 3/4" by 1 1/2" - same size as Gibson brand.
Screw hole spacing on the long size is about 3 7/32" measured from the center of one hole to the center of the other. Mounting screws not included.
4.95
PRPR010
Gibson brand
Black Gibson brand pickup ring with screws-1/8" neck, slanted. 1 piece. List $11
8.95
PRPR020
Gibson brand
Black Gibson brand pickup ring with screws-3/8" bridge, slanted. 1 piece.
8.95

PC733B

These are flat on one side of each ring and curved on the other.
When installing slanted pickup
rings, the taller side faces the
bridge.

Black Humbucking ring set-curved bottom, slanted side for carved top Les Paul, set of 2.
Outside dimensions: 3 1/2" by 1 3/4" Inside opening dimensions 2 3/4" by 1 1/2" - same size as Gibson brand. Mounting screws not included.

4.95
PC743B
Black slanted, flat bottom, humbucking ring set of two. Smaller height for neck pickup. Mounting screws not included.
4.95
PC743C
Cream slanted, flat bottom, humbucking ring set of two. Smaller height for neck pickup. Used for guitars such as ES335. Mounting screws not included.

Humbucking pickup ring set - Neck and Bridge, flat bottom, slanted, Cream plastic. Outside dimensions - 3-17/32" x 1-25/32", Inside dimensions - 2-3/4" x 1-1/2". The low mounting rings are for the neck position. The height tapers from 3/16" to 1/4". The tall mounting rings are for the bridge position. The height tapers from 3/8" to 7/16".
4.95
PC745C
Cream pickup rings-flat bottom, not slanted. Use for non-carved top guitars with humbucking pickups such as SG, Explorer, etc. Set of two. Mounting screws not included.
4.95
PC745B
Black pickup rings-flat bottom, not slanted. Use for non-carved top guitars with humbucking pickups such as SG, Explorer, etc. Set of two. Mounting screws not included.
9.95
PC745C

Cream pickup rings-flat bottom, not slanted. Use for non-carved top guitars with humbucking pickups such as SG, Explorer, etc. Set of two. Mounting screws not included. List $12

9.95
PP8-12N
Humbucker pickup ring mounting screws-nickel 8 pieces.
4 medium 3/4" and 4 long 1 1/4"

2.50
PP8-12G
Humbucker pickup ring mounting screws-gold phillips head, 8 pieces.
4 medium 3/4" and 4 long 1 1/4"
3.95
PP8-8B
Humbucker pickup ring mounting screws-Black 8 pieces.
4 medium 3/4" and 4 long 1 1/4"

2.50
PP5456N

Humbucker pickup pole pieces (6) Nickel 3/4" long

See pickup page for more pickup parts.

4.95

PP5453G

Humbucker pickup pole pieces (6) Gold 3/4" long

6.95

PP5453GA
Lightly aged gold Humbucker pickup pole pieces (6) - 3/4" long, #5-40
10.95

PC010
Gibson brand
Gibson brand Chrome Pickup Cover-Neck position, 1 15/16" or
Width between pole piece holes is 49 mm. Measure from center of first outside hole to center of the last outside hole.
15.95
PC015
Gibson brand
Gibson brand Chrome Pickup Cover-Bridge position, 2 1/16" pole spacing-measured from center of one outside post to the center of the other outside post.
15.95
PC030
Gibson brand
Humbucker Pickup Cover-Neck position, nickel. Some pickups use this cover size for both neck and bridge. Width between holes is 5 cm. Measure from center of one hole to center of the next one.
15.95
PC035
Gibson brand
Humbucker Bridge Cover-Bridge position, nickel
15.95
PCH-NNA
Aged nickel humbucker pickup cover for Gibson, Duncan and other humbucker pickups. 1 15/16" pole spacing. 1 piece. Measure from center of first outside hole to center of the last outside hole. 1 piece.
Most pickups will have the same pole spacing on both the neck and bridge pickup, but please measure to be sure. The look of aged pickup covers will vary a little from one to the next.
24.95
PC020
Gibson brand
Gold Gibson Humbucker Pickup Cover-Neck position. Some pickups use this cover size for both neck and bridge. Width between pole piece holes is 49 mm. Measure from center of first outside hole to center of the last outside hole.
21.95
PC025
Gibson brand
Gold Gibson Humbucker Pickup Cover-Bridge position. Width between pole piece holes is 52 mm. Measure from center of first outside hole to center of the last outside hole.
21.95
PRPC-045

Gibson brand
Cream P-90, P-100 "dog ear" pickup cover.
1 piece, Gibson brand. List $18
14.95
PRPC-040

Gibson brand
Black P-90, P-100 "dog ear" pickup cover.
1 piece, Gibson brand. List $18
Will not fit made in China Epi
Metric Parts page
14.95
PC739BLK

Gibson brand
Black "Dog ear" pickup cover set for P-90's-different heights-one is about 3/16" tall, the other 7/16" tall. Each has a flat bottom. Distance from center of screw hole in "ear" to center of screw hole in opposite ear is about 3 13/16"
Will not fit made in China Epis-see our Metric Parts page
9.50
PC739CR
Cream "Dog Ear" pickup cover set for P-90's. Different heights-
one is about 3/16" tall, the other 7/16" tall. Each has a flat bottom. Distance from center of screw hole in "ear" to center of screw hole in opposite ear is about 3 13/16"
9.50

PC739C

Will not fit made in China Epi. See Metric Parts page
Chrome "Dog Ear" pickup cover set for P-90's Covers are different heights and different hole spacing - neck is about 3/16" tall, measures 47mm center to center from outside string holes, the bridge is 7/16" tall, measures 49mm center to center of outside string holes. Shorter cover has a flat bottom, taller one has curved bottom for archtop guitars. Distance from center of screw hole in "ear" to center of screw hole in opposite ear is about 3 13/16" - Will not fit Seymour Duncan Dogear pickups. List $24
21.95

PC739NA

 

Nickel "Dog Ear" pickup cover set for P-90's-lightly aged to look old. Same specs as above.
29.95
PRPC-050

Gibson brand
Black Gibson brand Soap Bar Cover for P-90/ P100. 1 piece List $18
14.95
PRPC-055
Gibson brand
Cream Gibson brand Soap Bar Cover for P-90/ P100. 1 piece List $18
14.95
PC746CRM
Cream soap bar cover-2 pieces
7.75
PC746BLK
Black soap bar cover-2 piece
7.75
PC746CHR
Chrome plated plastic-2 piece
12.95
PCS3312N
Pickup cover mounting screws for soapbar covers, nickel. 4 pieces, 1 1/2" long, phillips head.
3.50
PCS3312BLK
Pickup cover mounting screws for soapbar covers, gold. 4 pieces, 1 1/2" long, phillips head.
3.95
Gibson Brand Strings
To keep your guitar sounding and playing its best, make sure your strings are fresh!
If you play 1 hour a day, strings should be changed every 2 weeks.
STGVR10
Gibson Vintage Reissue-Pure nickel wrap wire and finest quality core wire. Wound at the right speed to insure long lasting quality and 50's vintage tone. .010-.046W
List $14.45
$6.99
STGVR11

Gibson brand
Gibson Vintage Reissue-Pure nickel wrap wire and finest quality core wire. Wound at the right speed to insure long lasting quality and 50's vintage tone. .011, .014, .018, .028w, .038w, .050w
List $14.45
$6.99
Knobs
PRTK030
Gibson brand

Switch Knob-Gibson brand threaded toggle knob in Antique (light) amber (1) one piece.

$8.95
PRTK-010 Gibson brand

Switch Knob-Gibson threaded brand toggle knob in Black (1) one piece. Threaded

6.95
PRTK-059
Gibson brand
Historic Specs
Amber Gibson Historic threaded toggle switch caps- 2 pack. For Les Paul, 335, SG and other classic Gibson electric guitars. Darker color than Gibson Antique amber.
$18.95
PRTK-020
Gibson brand
Switch Knob-Gibson brand threaded toggle knob in White (1) one piece.
Color is actually off-white or light cream.
6.95
SK40C
Switch Knobs-cream 1 piece, threaded for USA toggle switch.
1.50
SK643CM
Metric
Metric Switch Knobs-cream or black, threaded for metric toggle import switch, smaller hole size.
See Metric Parts page
 
SK40-VA
Switch Knobs-amber 1 piece, threaded
Fits USA, Gibson, Switchcraft type switch.
1.95
SK40-B
Switch Knobs-black 1 piece, threaded, for USA Gibson, Switchcraft type switch.
1.45
SK40-G
Switch Knobs-gold 1 piece, threaded metal
Fits USA, Gibson, Switchcraft type swithces.
2.95
SK40C
Switch knobs-chrome 1 piece, threaded metal.
Fits USA, Gibson, Switchcraft type switch.
2.75
RT663WH
Rhythm/Treble Ring-switchwasher for Gibson-white plastic, gold lettering
2.95
RT663CR
Rhythm/Treble Ring-switchwasher for Gibson-Cream plastic with gold lettering

2.95
RT663Ch
Rhythm/Treble Ring-switchwasher for Gibson-Chrome no lettering
4.95
RT0663BL
Rhythm/Treble Ring-switchwasher for Gibson-Black plastic, gold lettering


2.95
PRWA010
Gibson brand
Rhythm/Treble Ring-Gibson brand switchwasher, black plastic, gold lettering
List $8 out of stock
6.95
WA020
Gibson brand
Rhythm/Treble Ring-Gibson brand switchwasher, black with white lettering
List $8
6.95
WA030
Gibson brand
Rhythm/Treble Ring-Gibson brand switchwasher, cream with gold lettering
6.95
RTR-CGA
Aged & degloassed Rhythm/Treble Ring switchwasher, faded cream with gold lettering.
8.95
All knobs below fit Gibson-style USA split shaft pots
Minimum order $20
PK130-022
Speed Knobs-amber 2 pieces, vintage style fits USA split shaft pot. Number 0-10. This color is the "aged" version of gold.
$4.95
PK130-032
Speed Knobs-gold 2 pieces, vintage style fits USA split shaft pot. Numbers 0-10.
4.95
PRSK-020
Gibson brand
Gold Speed knobs, Gibson brand. Set of 4. Fits USA split shaft pots. List $22

18.95
PK134-VB
Speed Knobs-black 2 pieces, vintage style tinted numbers-fits USA split shaft pots.
5.95
PK130-B
Speed Knobs-black 2 pieces, vintage style fits USA split shaft pots.
4.95
PRSK-010
Gibson brand
Gibson brand black speed knobs. Set of 4
18.95
PK130-31
Speed Knobs-Clear 2 pieces, fits USA split shaft
4.95


Far Left: Clear speed knob, 2nd From Left: White speed knob-Right: Bottom of clear and white knob

PK130-025
Speed Knobs-white 2 pieces, fits USA split shaft
4.95
Pk130-28
Speed Knobs-cream 2 pieces, fits USA split shaft
4.95
PK140-025
Bell knobs-white, fits USA split shaft, 2 pieces
4.95
Pk140-023
Bell or top hat knobs-black, vintage style, 2 pieces, USA split shaft posts
4.95
PRHK-010
Gibson brand
Black Gibson brand Top Hat knobs, set of 4
18.95
PK140-032
Bell or top hat Knobs-Gold, vintage style, 2 pieces, fits USA split shaft
5.95
HK020
Gibson brand
Gibson brand Gold Top Hat (bell) knobs, set of 4. List $22
18.95
PK140-022
Bell or top hat Knobs-amber, vintage style, 2 pieces, fits USA split shaft
This color is the "aged" version of gold.
5.95
HK030 Gibson brand
Top Hat Knobs-Gibson brand Vintage Amber, set of 4-like bell knobs above. List $19
18.95

PRMK-010

set of 4 Gibson brand

Gibson brand top hat reflector cap style knob set. Black body, silver cap, black lettering. 2 tone, 2 volume. List $19
18.95

PRMK-020

set of 4 Gibson brand

Gibson brand top hat reflector cap style knob set. Black body, gold cap, black lettering. 2 tone, 2 volume. List $19 Gold cap is a very light color.
18.95

PRMK-030 Gibson brand
Gibson brand top hat reflector cap style knob set. Gold body, gold cap, black lettering. 2 tone,
2 volume. List $22
18.95

PK182-23
Black Reflector Cap Bell knob-Silver cap, Tone, set of 2. For USA pots
5.95
PK184-23
Black Reflector Cap Bell knob-Silver cap, Volume lettering, black body with white numbering, set of 2. for USA pots
5.95
PK182TG
Reflector Cap Bell knob-Gold cap, Tone gold body, black lettering on top, set of 2. These match the volume knobs listed below.
5.95
PK184VG
Reflector Cap Bell knob-Gold cap, black lettering Volume on top, gold body with black numbering, set of 2
5.95
W77-1N

Pointer Washer-Goes under knob-nickel, price for 2 pieces. Takes the place of the washer on the pot.
1.75
W77-2G
Pointer Washer-Goes under knob-gold colored metal, 2 pieces
1.95
PK324B
Set of 4 black plastic "Witch Hat" knobs, 2 tone, 2 volume. fits USA shaft pots.
$10.95
Pickguards and Back Covers
Minimum order $20
If the pickguard you need for a Gibson guitar isn't listed below, we don't have it.
It may be possible to special order, but we would need a tracing.
Please check the screw hole alignment, pickup cutouts and shape carefully before ordering.
GPG-degloss
Deglossing option for any of the Gibson style pickguards shown below. This is in addition to the price of the pickguard and includes an aged pickguard mounting screw. This is a subtle aged look.
9.95
PRPG-050
Gibson brand Historic Specs
Gibson brand '59 Les Paul Historic Cream pickguard, with screws. List $58

46.95
PRPG-060
Gibson brand Historic Specs
Gibson brand '56 Historic Les Paul Cream pickguard. Cut for P-90 pickup. List $49
39.95
PRPG-030
Gibson brand
Gibson brand Les Paul Pickguard-w/ 2 screws 1-ply, cream List $29
24.95
PG800CRM
Pick guard for Les Paul-Cream 1-ply, generic brand. No mounting screws.
8.95
PG800AFC
Deglossed faded cream 1 ply Gibson style pickguard. Bracket sold seperately.
15.95
PG802-CRM
Pick guard for Les Paul Deluxe-Cream 1 ply, for smaller P-90 pickups, generic brand. No mounting screws.
8.95
PGPR-010B
Gibson brand
Gibson brand 1 ply black pickguard for LP Studio-w/2 screws. List $30
25.95
PGPR-020B
Gibson brand
Gibson brand 5-ply black LP Custom pickguard-w/ 2 gold screws. List $28
29.95
PG800-B3
Pick guard for Les Paul-Black 3-ply (b/w/b) 7 1/2" long
8.95
PG800-B5
Pick guard for Les Paul-Black 5-ply (b/w/b/w/b)
Depth of pickup cutout, about 5/8" - Width of top pickup cutout 1 3/4" - length of straight edge from bottom of the upper pickup cutout to the top of lower cutout, 2 1/4"

9.95
PG818-B5S
ES-335 pickguard-Black 5-ply-short version

14.95
PG813-B5L
Pic & info

ES-335 pickguard-Black 5-ply-longer than Les Paul pickguard,
about 8" long. Top pickup cutout is about 1 3/4" long at outside(straight) edge. Depth of top pickup cutout is about 3/4". Pickup cutout is for humbucker type, not dog-ear.

This pickguard is usually mounted with the PB626 bracket.

14.95
PG9815-Tort
L-5 cutaway & non cutaway pickguards-5-ply dark Tortoise with binding.
See Acoustic/Archtop parts page for more info & photos
PG9801BSM
SG pickguard, small, about 6 7/8" long. 3 ply black
9.50

PG9803B
SG pickguard, large, full face, about 7 1/4" from top center, straight down to bottom inside curve. 3 ply Black, 2-humbucker (11 holes)
Fits most vintage USA guitars.
17.95
PG9803W
SG pickguard, large, full face, about 7 1/4" from top center, straight down to bottom inside curve. 3 ply white, 2-humbucker (11 holes)
Fits most vintage 60's USA guitars. Won't fit Epiphone SG.
17.95
PGSGSS6
Pickguard Screws for Gibson-Stainless Steel, Phillips head, six (6) Measures about 3/8" long.
1.25
PGS-GSA
Pickguard Screws for Gibson-Aged, Phillips head, six (6)
2.95
PGscrewGibG
Pickguard Screws for Gibson-Gold, Phillips head, six (6) Measures about 3/8" long.
2.95
PGS-GGA
Pickguard Screws for Gibson-Aged Gold, Phillips head, six (6)
4.95
PGscrewGibB
Pickguard Screws for Gibson-Black, Phillips head, six (6) Measures about 3/8" long.
1.50
PGScrewGibN
Pickguard Screws for Gibson-Nickel, Phillips head, six (6) Measures about 3/8" long.
1.25
PGScrewGibCM
Pickguard Screws for Gibson-Chrome, Phillips head, six (6) Measures about 3/8" long.
1.50
HPMS12N
Humb Pickup mounting screws-Nickel vintage style set of 4. 1 1/4" long, with springs.
3.95
HPMS12G
Humb Pickup mounting screws-Gold vintage style set of 4. 1 1/4" long, with springs. #3 - 48
5.50

PB020C
Chrome Les Paul Pickguard bracket with assembly-Gibson brand
13.95
PB030N
Gibson brand
Nickel Les Paul Pickguard bracket with assembly-Gibson brand. List$16
13.95
PB030NA
Gibson brand
Lightly aged Nickel Les Paul Pickguard bracket with assembly-Gibson brand
18.95
PB010
Gibson brand
Gold Les Paul Pickguard bracket with assembly-Gibson brand
13.95
PB010A
Gibson brand
Lightly aged Gold Les Paul Pickguard bracket with assembly-Gibson brand
18.95
PB620-C
Les Paul style-Chrome pickguard support bracket with screws
3.95
PB620-N
Les Paul style-Nickel pickguard support bracket with screws. These look a little different from the Gibson brand bracket.
3.95
PB620-NA
Les Paul style-Lightly aged Nickel pickguard support bracket with screws. Slightly different look than the Gibson brand. Photo coming.
7.95
PB620-G
Les Paul style-Gold pickguard support bracket with screws
5.45
PB40C
Replacement screw and hex nut for Les Paul style brackets. Chrome
1.50
PB40G
Replacement screw and hex nut for Les Paul style brackets. Gold
1.50
Installing PB626 brackets for Archtops, some ES330, 335, mandolins, etc. The acrylic block is glued or cemented to the pickguard. You could also use double stick tape. Most of our pickguards come with a small indentation in the back of the pickguard that doesn't go all the way through. This is a reference for where the acrylic block is glued, but it's always a good idea to dry fit installations before making them permanent. To locate where the block goes on the pickguard, attach the bracket to guitar with the block installed on the bracket and mark back of pickguard. Remove the bracket, take off the block, glue block to pickguard, reinstall. Super glue is unforgiving, so if you have reservations about your installation techniques, try something like rubber cement, which can be scraped off if an error is made. This bracket may be too long for some archtops and may need to be modified, but it is the only one of this type we can find. These instructions are a general guide, other methods may apply. All instructions on GRGuitars.com website are supplied as information only. We are not responsible for errors, injury or damage to you, your musical instrument or others.
PB626-N
Archtop pickguard support bracket-nickel, with pickguard screw and threaded clear plastic block. Total length of bracket stem 2 1/4" inch. Threaded end of stem is 7/8"
12.45
PB626-NA
archtop pickguard support bracket-Lightly aged nickel, with screw and clear plastic block.
16.95
PB626-G
ES335 pickguard support bracket-gold, with screw and clear plastic block. Also fits some other archtops and mandolins
14.95
PB628-N
Pickguard support bracket-Nickel for thick bodied arched-top guitars.
9.45
PB628-G
Pickguard support bracket for thick bodied arched-top guitars, gold
12.45
PG814-brn
Back plate and switch cover for Les Paul-brown 1-ply-2 piece set
11.95
PG814-C
Back plate and switch cover for Les Paul-cream 1-ply-2 piece set
11.95
PG814-B
Back plate and switch cover for Les Paul-black 1-ply-2 piece generic set. Screws are not included.

11.95
SP010
Gibson brand
Gibson brand Black Les Paul switchplate cover (round) with screws. List $11
9.95
CP010

Gibson brand
Gibson brand Black Les Paul rear control cavity plate with screws. List $16
13.95
PRDK-030
Gibson brand
Gibson brand black backplate set of 2, with screws. List $25
22.75
PRCP-030
Gibson brand
Gibson brand SG control plate-black,
includes 5 screws.
List $16
13.95
Misc
Minimum order $20
PRTR-120
Gibson brand
Historic Specs
'59 Les Paul Historic Truss Rod Cover-Black, w/nickel screws. Used on late 1950's Les Pauls as well as Custom Shop guitars. List $39
34.95
PRTR-061
Gibson brand
Historic Specs
Historic '61 Truss Rod Cover-Black with white 'Les Paul' script, w/nickel screws. List $47
39.95
TRO30
Gibson brand
Truss rod cover-Black, for Les Paul Standard. Gibson brand. List $22

18.95
PRTR-040
Gibson brand
Gibson brand truss rod cover-Black Les Paul Studio with 2 nickel screws. List $22
18.95
TRO20

Gibson brand
Gibson brand truss rod cover-Black, for Les Paul Custom, 2 gold screws included.
List $22
18.95
TR010

Gibson brand
Truss rod cover-Black with white trim, screws included. Blank-no logo, Gibson brand. List $16
14.95
TR128B
Black bell truss rod cover with white trim, no screws. Retro Parts brand.
This truss rod cover is very similar in size and shape to the Gibson brand black with white trim, as shown in the comparison photo.
8.95
PG485BK
Truss rod cover-black with white trim, blank for Gibson, 2 nickel screws included.
4.95

PG485-CX
closeout

2 only

Truss rod cover-cream 1-ply for Gibson, no screws
4.95
TRS-3206N
4 truss rod cover screws. Phillips head, nickel #2 x 3/8"
1.50
TRS-3206G
4 truss rod cover screws. Phillips head, gold #2 x 3/8"
1.95
GJP010
Gibson brand
Jack Plate-Gibson brand, black plastic with screws.
6.75
GJP633-BK
Jack Plate for Gibson, black plastic, no screws. Order pickguard screws for mounting, if needed.
2.95
GJP020G
Gibson brand

Jack Plate-Gibson brand, gold with 4 screws.

 

13.95
GJP633-G
Jack Plate for Gibson, gold
4 mounting screws included
7.95
GJP030

Gibson brand
Jack Plate-Gibson brand, cream plastic
7.75
GJP633-C
Jack Plate for Gibson, cream plastic.
No screws, use pg screws, if needed.
2.95
JPG-AC
Aged deglossed faded cream Jack Plate with 4 aged mounting screws.
9.95
GJP040
Gibson brand
Jack Plate-Gibson brand, nickel
List $15
12.95
GJP040A
Gibson brand
Jack Plate-Gibson brand, nickel-aged to look old, 4 aged screws.
17.25
GJP633-nk
Jack Plate for Gibson, nickel
5.95
GJP633W
Jack Plate for Gibson, white plastic.
2.95
GP6695
Nickel Gibson-style strap button set with screws.
3.50

GPEP020
Gibson brand

Aluminum Strap Buttons, set of 2-Gibson brand
5.95
GPEP010
Gibson brand
Brass Strap Buttons, set of 2-gibson brand
5.95
BN2226GB
Earvana compensated nut 1 11/16" Gibson style. Cream color
List $30
24.95

GGRK1

 

USA orders only on this item.
In Stock
Gibson brand

Gibson Vintage Reissue Guitar Restoration Kit-Metal cleaner, fretboard conditioner, finish cream and 2 polish cloths. List $23

Not available for International orders.
18.95

Parts list for '59 re-issue

Tuners-TKSD90SLN, Authentic Kluson, press fit bushings, pearloid tuner buttons
Neck plate-#NP600C chrome w/4 screws
Gibson strap buttons-#GPEP020 aluminum set of 2
Gibson brand bridge-#BR015 nickel
Featherweight tailpiece-#TP3406N nickel
Jack plate-GJP633-CR cream
Switch washer-RT663CR cream
Truss rod cover-#TR010 Gibson brand blank, black
2 sets Knobs-#pk1419022 amber
Switch tip-GTK030 Gibson brand Antique amber