Guitar Pickups-Seymour Duncan, Fender, Gibson
Pick mounting screws, conversion rings, tubing
If you reached this page via an Internet search engine please note:
A frame set with links to all our different sections should appear on the left of the screen.
If it's not there, log off and use: File/Open "www.GRGuitars.com"
to see our entire offering of instruments and repair parts.
Table of Contents

- See Electronics page for switches, push/pull pots, etc.
Bass Guitar Pickups-See Bass page


All in stock pickups for Strat, Tele and Gibson guitars are listed below.
Please Note: You may need to clear "history" to see our newest listings or Refresh webpage.


Sorry, no returns on pickups.
Limited to stock on hand. email grguitars@msn.com with questions.


D59HU Used Duncan 59 Humbucker black and cream. 8.1 ohm
Has the gibson style braided wire.


 

39.00

Strat Pickups
Single coil pickups normally use 250k pots
PU417Wxx
Clearance
7 left
Economy Strat single coil pickup with white cover. Ceramic magnet, flat pole pieces, 8.0k ohms. 1 piece. Mounting screws included.

6.95 ea

 

099-2131-000xx

Fender Tex-Mex Strat pickup set of 3, white covers
1 set left

64.95

11024-09xx

 

Neck/
Middle/
or
Bridge

 

List
$135

Seymour Duncan Antiquity II "Surf" for Strat
aged vintage 1960's replacement. Cover included.
1 left

 

 

$95.00
ea


 

11024-10xx

Middle

1 left

Seymour Duncan Antiquity II "Surf" for Strat. Reverse wound-Reverse polarity for middle position. Aged vintage 1960's replacement. Cover included. 1 left

$95.00
ea

11024-08xx

Bridge

Seymour Duncan Antiquity II "Surf" for Strat. Custom Bridge
Pickup cover included. 2 left

Hotter than 11024-09 List $105

$95.00
ea


11024-3surf

set
1 left

Set of 3 Antiquity II Surf pickups, 2 of 1024-09 with RWRP 10, for middle or one of each-listed above-11024-8, 9, 10 (by request). Pickup covers included.

$285.00


11024-01xx

bridge

Seymour Duncan Antiquity for Strat Texas Hot-traditional classic hand wind. Custom bridge (1) pickup. Cover included.
2 left

$95.00

11024-02xx
neck
middle
bridge

Seymour Duncan Antiquity for Strat Texas Hot-traditional classic hand wind. For Neck, middle, bridge. Cover included.
List $105 2 left

$95.00

 

11024-Rxx

middle

Reverse wound Seymour Duncan Antiquity for Strat Texas Hot-traditional classic hand wind. (1) pickup. 2 left

$95.00

 

11024-3STHxx
Seymour Duncan Antiquity for Strat Texas Hot-traditional classic hand wind. Set of 3, one each of 3 listed above. Covers included. $285.00

 

SSL-1 xx
Seymour Duncan-Vintage Staggered List $84 each
Cover not included-uses standard Strat pickup covers
3 left
Vintage-correct true single-coil for warm instruments. Recommended for country, pop, surf, rockabilly, blues, ska and classic rock. Our most popular single-coil for Strat®. The hand-ground Alnico 5 magnets and moderate windings (Heavy Formvar® wire) yield a bright and punchy tone with vintage output. Perfect for players who need accurate traditional single-coil tone, especially with clean and mildly distorted amp settings. Compared to the APS-1, the SSL-1 has a more focused “bell” tone with a tighter bass response. Comes with waxed cloth hookup cable and vintage-style “keyed” bottom plate.
59.00

 

SSL-1RWxx
middle

Seymour Duncan-Vintage Staggered Reverse wound.
1 left
59.00

 

SSL-2xx
Seymour Duncan-Vintage vintage flat for Strat.
Exact replica of the original Stratocaster pickup.Same type of magnet wire with same number of windings. No cover. 2 left
59.00

SSL-3xx
11202-01
1 left

Hot for Strat white cover. More output than vintage models with increased sustain and fullness. 1 left
List $72

59.00

SDBR-1nxx
11205-35B

2

Duckbuckers for Strat-Black neck
Warm tone and cooler output of vintage pickups without the hum
2 left List $104

85.00

SDBR-1bxx
11205-36B

2

Duckbuckers for Strat-Black bridge
Warm tone and cooler output of vintage pickups without the hum
2 left

List $104

85.00

11102-82-Bxx
Seymour Duncan Dimebucker. Black with black mounting ring. Good for heavy rock and metal. 1 only 105.00

TB-11xx
1 only

 

Seymour Duncan Custom Custom Trembucker, black. List $109.00

Four conductor cable, bridge position
1 only

89.95

PR761Cxx
1 left
Chrome metal Single Coil pickup mounting ring for Strat-1 piece, with screws.

6.95

PR761Gxx
3 left
Gold metal Single Coil pickup mounting ring for Strat-1 piece, with screws.

9.95

PC6643Bxx
2 left
Black pickup conversion ring. Covers humbucker cutout in guitar to convert to single coil pickup. 1 piece, with 4 screws.
Has a protective cover to be removed before installation.

5.95

PC6643Cxx
3 left
Cream pickup conversion ring. Covers humbucker cutout in guitar to convert to single coil pickup. 1 piece, with 4 screws.
Photo looks white, but it is light cream.
5.95

More Tele Pickups - See Tele Parts page
11024-26xx
Seymour Duncan Antiquity, aged vintage 1950's replacement-1955 Telecaster neck List $115 See Tele page

Bass Guitar Pickups-See Bass page

Humbuckers & Pickups for Gibson Guitars
Humbucker rings sold on Gibson Parts webpage
500k pots are standard for humbucker pickups

11014-09xx

Seymour Duncan Antiquity II Firebird-no holes-neck. DC ohms 6.7k. Width 1.086, Length 2.577. List $168
Pickup cover included. 1 left
145.00

 

11014-10xx

Seymour Duncan Antiquity II Firebird-no holes-bridge. DC ohms 8.2k, width 1.086, length 2.577. List $168 1 left
145.00

 

PR5764xx
4 pieces

Metal pickup mounting ring for Firebird, chrome (1 piece) Fits Antiquity pickups #11014-09, -10
Outside dimensions = 3 7/16" long, 1 1/2" wide
Inside dimensions = 2 11/16" long, 1 1/8" wide
Screw holes measured center to center:
Long side: 3 1/8" - Short side: 1 3/16"

$4.95

PR747Bxx
2 sets left
Black plastic mini humbucker pickup mounting ring (2 pieces)
Inside dimensions = 2 11/16" long, 1 1/8" wide
Height about 5/8"
4.95

PR747Cxx
3 sets left
Cream plastic mini humbucker pickup mounting ring (2 pieces)
Mounting screws not included.
Inside dimensions = 2 11/16" long, 1 1/8" wide
Height about 5/8"
4.95

PC741Cxx
1 only
Chrome metal humbucker ring, flat. 1 piece No screws
7.95

PC741Gxx
3 only
Gold metal humbucker ring, flat. 1 piece No screws
8.95

11014-11xx
1 only
Seymour Duncan Antiquity II Mini-Humbucker neck
List $168
145.00

 

11014-12xx
1 only
Seymour Duncan Antiquity II Mini-Humbucker bridge. Mounting ring and screws are included.
145.00

 

SP90-1nxx
11301-05- bc
Seymour Duncan-Vintage P-90 soapbar neck (black) List $109.00. 1 only
50's soapbar tone, Alnico V bar magnet, single conductor cable, moderate output.
95.00

SP90-1bxx
11301-06- bc
Seymour Duncan-Vintage P-90 bridge (black)
1 only. List $109.00
95.00

P90-418Bxx
1 only
P-90 pickup with black dog ear cover. 5.4k. 2 mounting screws. List $55
29.95

11034-65xx
neck
Seymour Duncan Antiquity P-90 pickup with black dog ear cover. Neck 1 only
119.00

11034-66xx
bridge
Seymour Duncan Antiquity P-90 pickup with black dog ear cover. Bridge 1 only
119.00

11102-01-Bxx
SH-2n

Seymour Duncan Jazz Model, black List $104 1 only
79.00

PCH-NNA
Aged nickel humbucker pickup cover for Gibson, Duncan and other humbucker pickups. 1 15/16" pole spacing. 1 piece. Measure from center of first outside hole to center of the last outside hole. 1 piece.
Most pickups will have the same pole spacing on both the neck and bridge pickup, but please measure to be sure. The look of aged pickup covers will vary a little from one to the next.
22.95
Jaguar - Jazzmaster -Mustang Pickups
are listed on the page with repair parts
See Acoustic page also
11034-51xx
1 left
Antiquity for Fender Mandolin. List $90
85.00

 

11034-41xx
2 left
Antiquity for Stringmaster Lap Steel. List $90
2 only
85.00

 

Screws & pickup parts

PCS3312N
Pickup cover mounting screws for soapbar covers, nickel. 4 pieces, 1 1/2" long, phillips head.
3.50
PCS3312B Pickup cover mounting screws for soapbar covers, black. 4 pieces, 1 1/2" long, phillips head.
3.95
PCP90N
P-90 Pickup cover mounting screws, nickel. 4 pieces, 1 1/4" (32mm) long, 2.8mm width, phillips head. Wood screw. These are for body mount (no metal body mounting plate)
3.50
PS348N
Nickel Slot head humbucker pickup height screw for US thread. #3-48 RH machine screw. 1 1/4" long. Won't fit metric. 4 pieces.
3.50
PP5453N
Humbucker pickup pole pieces (6) Nickel 3/4" long #5-40
4.95

PP5453G
Humbucker pickup pole pieces (6) Gold 3/4" long, #5-40
6.95

PP5453GA
Lightly aged gold Humbucker pickup pole pieces (6) - 3/4" long, #5-40
10.95

GPS07S
Pickup mounting screws for Strat (6) stainless, w/ six cone springs 3/4" long. Round head, phillips
Use this style if the pickup screw holes in the pickguard are not recessed.
3.45

GPS07SA
Lightly aged Pickup mounting screws for Strat (6) stainless, 3/4" long. Round head, phillips
Use this style if the pickup screw holes in the pickguard are not recessed.
5.95

GPS07G
Pickup mounting screws for Strat (8) gold, #6, 3/4"
Use this style if the pickup screw holes in the pickguard are not recessed. The extra two are for the 5-way switch.
4.7;5


GPS07GA
Lightly aged pickup mounting screws for Strat (8) gold, #6, 3/4"
Use this style if the pickup screw holes in the pickguard are not recessed. The extra two are for the 5-way switch.
6.95


GPS64
Pickup mounting screws-stainless steel vintage style for Strat (8)
includes 6 springs. The extra two screws can be used for mounting 5 way switch. This type screw is used when the pickup screw hole in the pickguard is recessed.
3.95

GPS64A
Lightly aged pickup mounting screws-stainless steel vintage style for Strat (6)
This type screw is used when the pickup screw hole in the pickguard is recessed.
5.95

GPS64G
Pickup mounting screws-gold beveled head vintage style for Strat (6).
springs sold below
6.25
GPS64GA
Lightly aged gold Pickup mounting screws-beveled head vintage style for Strat (6)
9.95


GPS375
Tele stainless pickup mounting screws, for under pickguard-set of 4. Total length 1"
1.95

GPMS-12
Humb Pickup mounting screws-Nickel vintage style set of 4. 1 1/4" long, with springs.
USA threads
3.95

GPMS-12G
Humb Pickup mounting screws-Gold vintage style set of 4. 1 1/4" long, with springs. USA threads.
5.50

PP8-12G
Pickup mounting ring screws (8) gold phillips head
4 medium 3/4" and 4 long 1 1/4"
3.95

PP8-12N
Pickup mounting ring screws (8) nickel
4 medium 3/4" and 4 long 1 1/4"
2.95

EP654-G
Gold nut & dress washer for 1/4" jacks and pots, 1 of each.
1.95
GPM-T
Pickup mounting springs for Strat-cone shaped stainless steel set of 6
1.50

99-4916PT
Fender pickup mounting tubing. 12 pieces.

4.45