Tele®
replacement parts:
Including Esquire®
and Broadcaster®
If
you reached this page via an Internet search engine please note:
A frame set with links to all our different sections should appear
on the left of the screen.
If it's not there, log off and use: File/Open "www.GRGuitars.com"
Table of Contents
for limited time coupon codes that save you money:
Email: grguitars@msn.com put Coupon Code in the subject heading with your name and email address in the body of the email. We do not share email address with anyone else.
In
the market for a USA made guitar body? Now thru March 15 only
Enter coupon code # 20M at check out
to save an add'l $20.
Valid on orders of $150 or more that include a guitar body, finished or
unfinished. Please note: Shipping cost may be more than
the shopping cart software automatically adds, depending on weight of
box and destination.
|
|
||||
Ready
to Ship-GRGuitars
hand build Esquire style guitar-scroll to bottom of this page for details  |
||||
|
GWTAN
As
New, |
Wired
Tele control plate assembly-Chrome control plate, 2 chrome dome
knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft
pots, cap, wire, input cup with clip and 1/4" jack. Pickup connection
wires clearly marked. 1966 schematics used unless otherwise requested.
Order input cup seperately, below.  
|
79.00 |
||
|
GWTANB
As
New, |
Wired
Tele control plate assembly-Chrome control plate, 2 chrome dome
knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft
pots, cap, wire, input cup with clip and 1/4" jack. Pickup connection
wires clearly marked. 1966 schematics used unless otherwise requested.
Order input cup seperately, below.  |
79.00 |
||
|
GWTAA
|
Lightly
Aged Wired Tele control plate assembly with lightly aged
hardware. Aged chrome control plate with mounting screws, 2 aged chrome
barrel knobs, 3-way switch, black switch knob, 2 CTS 250k solid shaft
pots, cap, cloth wire and 1/4" jack and input cup with clip. Pickup
connection wires clearly marked. 1966 wiring diagram used unless otherwise
requested. High hat switch tip may be substitued for barrel type and
dome knobs instead of barrel-by request.
|
99.95 |
||
|
About
wired Tele control plate assemblies: Switch wiring for assemblies
above will be 1966 type unless you specify otherwise in an email
referring to your shopping cart order number. Here's the difference:
The '52 wiring has a bassy rhythm tone in the first position of
the switch. The middle position is neck pickup only, the third is
bridge only. The main difference between the '53 and the '66 is
that the 1966 style allows for combination of neck and bridge pickup
together in the middle position. See Lefty page for left handed Tele control assemblies. |
||||
|
GWTAN-4W
Diagram
included. |
Wired
Tele control plate assembly-Chrome control plate, 2 chrome dome
knobs, 4-way switch, black barrel switch knob, 2 CTS 250k solid
shaft pots, cap, wire, input cup with clip and 1/4" jack. Pickup
connection wires clearly marked. 1966 schematics used unless otherwise
requested. This assembly can also be wired for Esquire. Barrel knobs
may be substituted for dome and a high hat switch knob for the barrel-by
request. Order input cup seperately.
|
89.00 |
||
|
GWTAA-4W
|
Lightly
Aged Wired Tele control plate assembly with lightly aged
hardware. Aged chrome control plate, 2 aged chrome barrel knobs, Fender 4-way switch, black switch knob, 2 CTS 250k solid shaft pots, cap, cloth wire and 1/4" jack and input cup with clip. Pickup connection wires clearly marked. 1966 wiring diagram used unless otherwise requested. High hat switch tip may be substitued for barrel type and dome knobs instead of barrel-by request.
|
109.95 |
||
|
GWETAN email with your order # if you prefer flat top barrel knobs |
Wired
Esquire control plate assembly-Chrome control plate, 2 chrome dome
knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft
pots, 3 caps, 1 resistor, wire, input cup with clip and 1/4" jack.
Pickup connection wires clearly marked.
|
89.00
|
||
|
GWETANA
email with your order # if you prefer flat top barrel knobs |
Lightly aged Wired Esquire control plate assembly-Chrome control plate, 2 chrome dome knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft pots, 3 caps, 1 resistor, wire, input cup with clip and 1/4" jack. Pickup connection wires clearly marked. Specify dome or flat top metal knobs. |
104.95
|
||
|
GWTAG Gold control plate & knobs As New |
Wired Tele control plate assembly-Gold control plate with mounting screws, 2 gold dome knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft pots, cap, wire, and 1/4" jack. Pickup connection wires clearly marked. 1966 schematics used unless otherwise requested. This assembly can also be wired for Esquire (add'l $5). Barrel knobs may be substituted for dome and white barrel knob or a a high hat switch knob for the barrel-by request. Order gold input cup seperately, below. |
104.95
|
||
|
GWTAGA Gold control plate & knobs Lightly aged |
Lightly aged Wired Tele control plate assembly-Gold control plate with mounting screws, 2 gold barrel (flat top) knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft pots, cap, wire, and 1/4" jack. Pickup connection wires clearly marked. 1966 schematics used unless otherwise requested. This assembly can also be wired for Esquire (add'l $5). Barrel knobs may be substituted for dome and white barrel knob or a a high hat switch knob for the barrel-by request. Includes lightly aged gold input cup. |
129.95
|
||
|
SChrdFKN
|
Deluxe Tele Kit-Nickel/chrome hardware: Features a Fender brand 3 brass saddle bridge, stamped "Fender Pat. Pend." and Authentic Kluson tuners. Includes round string guide, neck plate & screws, Fender string ferrules, 8 pickguard screws, input cup, strap button set, Fender control plate & dome knobs. (Barrel knobs available by request). Regular list price on this package is $165 |
$149.00
|
||
|
SChrdFKNA
|
Deluxe Aged Tele Kit-Features slightly rusty nickel/chrome hardware: Fender brand 3 brass saddle logo bridge and Authentic Kluson tuners. Includes round string guide, neck plate & screws, string ferrules, 8 pickguard screws, input cup, strap buttons, control plate & flat top barrel knobs. (Dome knobs available by request) |
$169.00
|
||
|
SChrdFKNW As New |
Deluxe Drop-in wired control assembly/hardware Kit-Features nickel/chrome hardware: Fender brand 3 brass saddle logo bridge and Authentic Kluson tuners. Includes round string guide, neck plate & screws, string ferrules, 8 pickguard screws, input cup, strap buttons, control plate & dome top knobs. (Flat top barrel knobs available by request). Wiring kit w/pots, caps, 3 way switch, jack, and cloth wire, and includes labor to for the control assembly. Pickguard and pickups sold separately-see below. |
$199
|
||
|
SChrdFKNW4 As
New |
Deluxe Drop-in wired control assembly with 4 way switch/hardware Kit-Features nickel/chrome hardware: Fender brand 3 brass saddle logo bridge and Authentic Kluson tuners. Includes round string guide, neck plate & screws, string ferrules, 8 pickguard screws, input cup, strap buttons, control plate & dome top knobs. (Flat top barrel knobs available by request). Wiring kit w/pots, caps, Fender 4 way switch, jack, and cloth wire, and includes labor to for the control assembly. Pickguard and pickups sold separately-see below. |
$219
|
||
|
SChrdFKNAW
|
Deluxe
Aged Drop-in wired control assembly/hardware
Kit-Features slightly rusty nickel/chrome hardware: Fender
brand 3 brass saddle logo bridge and Authentic
Kluson tuners. Includes lightly aged round string guide, neck
plate & screws, string ferrules, pickguard screws, input cup, strap
buttons, control plate & flat top barrel knobs. (Dome knobs available
by request). Wiring kit w/pots, caps, switch, jack, and cloth wire,
and includes labor to install the parts for the control assembly. Pickguard
and pickups sold separately-see below. |
$234.95
|
||
| SChrdFKNA4W | Deluxe Aged Drop-in wired control assembly with Fender 4 way switch/hardware Kit-Features slightly rusty nickel/chrome hardware: Fender brand 3 brass saddle logo bridge and Authentic Kluson tuners. Includes lightly aged round string guide, neck plate & screws, string ferrules, pickguard screws, input cup, strap buttons, control plate & flat top barrel knobs. (Dome knobs available by request). Wiring kit w/pots, caps, switch, jack, and cloth wire, and includes labor to install parts for the control assembly. Pickguard and pickups sold separately-see below. |
$254.95
|
||
|
SChrd10N |
All
the hardware needed to assemble a Single Cutaway style guitar-nickel/chrome.
Includes vintage-style 3 saddle Tele® bridge, string ferrules, kluson
tuners, chrome control plate, 2 dome knobs (email referencing order
# if you prefer flat top barrel knobs) chrome neckplate and screws,
round sring retainer, strap button set, 8 pickguard screws and jack
input cup-Reg retail $135.00 |
109.95
|
||
|
SChrd20NW |
Drop-in
wired control assembly (see #GWTAN below under Electronics) and
all hardware needed to assemble a Single Cutaway guitar-nickel/chrome.
Includes vintage-style 3 saddle Tele® bridge without logo, #TB5120N,
dome knobs (unless you request flat top barrel knobs), kluson style
tuners, string ferrules, etc. |
149.95
|
||
| SChrd10NA aged |
All the aged nickel/chrome hardware needed to assemble a distressed Single Cutaway style guitar. Includes vintage-style 3 brass saddle Tele® bridge |
139.95
|
||
|
SChrd10G
|
All
the gold hardware needed to assemble a Single Cutaway
style guitar. Includes gold kluson style tuners, vintage-style 3 saddle
Tele bridge-choice of brass saddles on gold bridge plate or threaded
gold saddles (shown below), choice of gold dome knobs or flat top barrel
knobs. Reg retail $173.00 Email
bridge saddle and knob choice with order number. |
145.95
|
||
|
SChrd-TPLW
Top Loading bridge kit As new |
Drop-in
wired control assembly (see #GWTAN ) & all hardware needed to
assemble a Single Cutaway guitar-nickel/chrome. Includes top loading
6 saddle Tele style bridge without logo, dome knobs (unless you request
flat top barrel knobs), kluson style tuners, string retainer, input
cup, 8 pickguard screws, strap buttons, neck plate & screws. NO
string ferrules. |
135.95
|
||
|
Special
Price Product of the USA #SC50AU3 |
GR
Alder Guitar Body-single cutaway 50's style, unfinished alder. The
alder is locally grown here in Washington State and the bodies are completely
bench made in our shop. Neck pocket is standard Fender style and will
work with the necks we carry or USA manufactured Tele necks.  White
strip in neck pocket is just a piece of masking tape with product # |
SALE
PRICE $144 S & H $25 email for overseas shipping quote |
||
|
SC50ALDU
Ready
to Ship |
GR
Alder Guitar Body-single cutaway 50's style, unfinished alder,
2 piece wood. Example shown below is ready to ship. Weight 4
lbs, 8 oz. Neck pocket is standard Fender style and will work with the necks we carry or other USA manufacturered Tele necks.   |
SALE
PRICE $159 S & H $25 |
||
|
SC50ALDHUHumb
|
GR
Alder Guitar Body-single cutaway 50's style, unfinished alder,
2 piece wood. Same shape and style as photo above, except with
humbucker routing in the neck position. Neck pocket is standard Fender style and will work with the necks we carry or other USA manufacturered Tele necks. |
$175 S & H $25 |
||
SCALDUVUUniversal
|
GR
Alder Guitar Body-single cutaway 50's style, unfinished alder,
2 piece wood. Universal routing allows 3 different
pickup/pickguard configurations without having to buy a completly new
guitar to experiment.  |
$175S & H $25 |
||
|
TBpineU
|
Unfinished sugar pine Tele body. Standard routing. Allparts brand. List $265 |
$219S & H $25 |
||
|
#SCBL-50
|
GR
Alder Guitar Body-single cutaway 50's style
vintage style Sonic Blue with white undercoat distressed #3+. Weight 4 lbs 14 oz. Neck pocket routed to standard USA Fender specs.     Actual color is closest to the last photo. |
Reg Price $439 Save $50
$389.00
Shipping
& Handling approx Approx
$48
|
||
|
#TBASFH Ready to go |
Surf
Green alder Tele body with humbucker in neck position. Can be distressed
by request. USA made in our shop of local kiln dried alder. |
sold |
||
|
TN558R
|
Lacquer finished Maple/rosewood 21 fret Tele neck
|
$209.00
USA
S & H $20 |
||
|
TN557MC
Standard Fender 2 3/16" heel width. Heel width is measured at the bottom of the neck, just above the round over, about a 1/4" up from the heel on back. |
Distressed
amber lacquer finished 21 tall frets (.079 x .051) chunky C back Tele
neck. Vintage style amber lacquer finish is done in our shop in
WA state. Wear on back of neck, headstock wear.List
$295 Measures
about 1" at 1st fret, 1.17" at 12th fret. |
$239.00
USA S & H $20 |
||
|
TN4477MC
Standard Fender 2 3/16" heel width. Heel width is measured at the bottom of the neck, just above the round over, about a 1/4" up from the heel on back. |
Amber
lacquer finished 21 tall frets (.079 x .051) chunky C back Tele neck.
Can be distressed by request. Has a little flame figure on the back.
Vintage style amber lacquer finish is done in our shop in WA state.
List $265 Measures
about 1" at 1st fret, 1.17" at 12th fret.
|
$209.00
USA S & H $20 |
||
| NKWR-HD Neck finish Option on a lacquer finished neck purchased from us |
Headstock
wear, front and/or back. A little chipping and edge wear. |
$10 |
||
| NKWR-FA Neck finish Option on a lacquer finished neck purchased from us |
Wear
on first 5 frets of fingerboard, maple or rosewood  |
$25 |
||
| NKWR-BC Neck finish Option on a lacquer finished neck purchased from us |
Some
wear on back of neck |
$20 |
||
| NKWR-BB Neck finish Option on a lacquer finished neck purchased from us |
Most
of the finish worn off the back. |
$25 |
||
| NK-BN Neck assembly Option on a lacquer finished neck purchased from us |
Labor charge for installing cut bone nut-price includes nut. Some adjustment to depth of string slots may be needed during setup. | $18 |
||
| NK-TI Neck assembly Option |
Labor charge for installing tuners-neck and tuners must both be purchased from us. | $10 |
||
|
TNFCMU
|
Unfinished
Maple chunky C back Tele neck. 21 frets tall frets (.079 x .051),
9 1/2" radius, 1 5/8" nut width, Tuner holes measure .340".
Thickness about .99" thick at the first fret, 1.0" at 12th
fret. Fender licensed. List $175
|
$144
S
& H $20 |
||
|
TNMOCU
|
Unfinished
Maple C back Tele neck. 21 tall frets, 10" radius, 1 5/8"
nut width. This neck measures about .85" thick at the first fret,
.96" at 12th fret. Fender licensed. Tuner holes measure .340"
List $175  |
$144
S
& H $20 |
||
|
See Ready to Ship Page for our vintage style unfinished & amber lacquer finished necks. All unfinished necks are stamped "licensed by Fender" on the heel. Neck heel width is about 56 mm. |
||||
|
FAQ: I've selected a single cutaway guitar body, Tele neck and a wired assembly and hardware kit (SChrd20NW). What other parts do I need to make a complete guitar? You'll need a nut for the guitar neck, guitar strings, a Tele pickguard, and a set of Tele pickups. The body can be oiled or finished with paint or lacquer to your own preference. The neck should be painted or lacquered, not oiled, for wood stability. For first time guitar builders, itmay be eaier to buy a lacquer finished neck and use just the unfinished body to teach yourself painting. If the paint doesn't work out it can be stripped with appropriate paint stripper. Lacquer finished necks are available on our "Ready to Ship" page. FAQ:
How is bridge string spacing measured? String through holes
in the bridge are measured center to center from two outside holes: |
||||
|
Tele
Bridges-Aged hardware takes a few
days, please be patient.
Minimum order $20 |
||||
|
TB5120N
|
Tele®
Bridge-vintage style 3 saddle, nickel with brass saddles,
w/ 4 mounting screws 2 3/16" string spacing |
36.95
|
||
|
TB020A
|
Tele Bridge-vintage style nickel with 3 brass saddles, w/screws 2 3/16" spacing-"aged" to appear used. Bridge plate does not have logo. |
49.95
|
||
|
TB5125N
|
Tele
Bridge-vintage style nickel, 3 tilt compensated brass saddles, 4
mounting screws included. 2 3/16" spacing |
45.95
|
||
|
TB024N
|
Tele Bridge-vintage style 3 threaded nickel saddles, 4 mounting screws - 2 3/16" spacing | 34.95 |
||
|
TBV3F
|
Tele bridge-Fender logo bridge plate, stamped "Fender Pat. Pend. " vintage style 3 brass saddles, 4 mounting screws included. List $70.00 |
62.95 |
||
|
TBV3FA
|
Aged
Tele bridge-Fender logo bridge plate, vintage style 3 brass saddles,
aged to appear used. Includes 4 mounting screws. |
79.95 |
||
|
TBV3TF
|
Tele
bridge-Fender logo bridge plate, vintage style 3 threaded saddles,
4 mounting screws included. |
62.95 |
||
|
TBV3TFA
|
Aged
Tele bridge-Fender logo bridge plate, vintage style 3 threaded
saddles, aged to appear used. Includes mounting screws. 
|
79.95 |
||
|
TBV3Fcmp
|
Tele
bridge-Fender logo bridge plate, vintage style 3 compensated
brass saddles, mounting screws included. |
69.95 |
||
|
TBV3FcmpA
|
Aged
Tele bridge-Fender logo bridge plate, vintage style
3 compensated brass saddles, mounting screws included. Aged
to look old. |
85.95 |
||
|
TB020TG
|
Tele®
Bridge-vintage style 3 threaded/roller saddle , gold backplate,
gold saddles and gold screws. 2 3/16" string spacing. |
45.95
|
||
|
TB020TGA
|
Lightly
aged Tele® Bridge-vintage style 3 threaded/roller saddle
, gold backplate, gold saddles and gold screws. 2 3/16" string
spacing. |
58.95
|
||
|
BPT24-n
|
Replacement
threaded saddles for vintage style Tele bridge, set of 3, nickel.
|
19.95 |
||
 BPT24-NA |
Aged
Replacement threaded saddles for Tele bridge, set of 3, aged
nickel. Will fit Fender brand or other bridge plates with 2 3/16"
spacing.
|
29.95 |
||
|
BPT537-brs New |
Replacement
Brass bridge saddles for Tele, set of 3
New saddle on left, "aged" saddle on right |
19.95 |
||
|
11089-01
Aged |
Seymour
Duncan Antiquity 50s aged brass bridge saddles for Tele. Set of 3. List
$95 Available by Special Order Only-takes about two weeks. 
|
66.95 |
||
 From left: Wilkinson #TB5128N, compensated #BPT2328, threaded #BPT24-nic, brass #BPT537-brs If you want a groove in the saddle, rub an old guitar string across the center a few times. |
||||
|
BPT2328
|
Tilt-compensated
brass replacement bridge saddles for Tele, set of 3. The saddle is drilled slightly off center and is not adjustable. See photo above. |
22.95
|
||
|
BPT2328A
|
Aged
tilt-compensated brass replacement bridge saddles for Tele, set
of 3. The saddle is drilled slightly off center and is not adjustable. |
31.95
|
||
|
BPT2329
|
Wilkenson brass swivel bridge saddles with screws-set of 3. These saddles are best for holding intonation settings. The center can be swivled and then locked down with a screw to stay in place. List $60. See photo above. | 53.95
|
||
|
TB5128N
|
Wilkinson
Tele Bridge-Nickel Vintage 3 swivel brass saddles 2 1/8" spacing,
4 phillips head mounting screws included. List $99.00 These saddles
are best for holding intonation settings. The center can be swivled
and then locked down with a screw to stay in place
|
84.95 |
||
| TB5128NA | Lightly
aged Wilkinson Tele Bridge-Nickel Vintage 3 swivel brass saddles
2 1/8" spacing, 4 phillips head mounting screws included. These
saddles are best for holding intonation settings. The center can be
swivled and then locked down with a screw to stay in place. Color is
a little off in this photo. |
109.95 |
||
|
TB30C
|
|
64.95
|
||
|
TB30CA
|
Lightly aged chrome Tele bridge with rectangular saddles. 2 1/8" spacing. | 83.95
|
||
|
TB30C
|
Gotoh
brand gold plated brass Tele bridge with rectangular saddles,
4 mounting screws (mounting screw holes measure 2 9/16" center
to center of outside holes.) See photo of TB30C, above. 2 1/8" spacing (string through holes, measured center to center from two outside holes.) List $98 Special Order-takes about a week to ship. |
86.95
|
||
|
TB31C
|
Tele
bridge for humbucker pickup. Gotoh brand, brass bridge with chrome
plating. 6 rectangular saddles, 2 3/32" spacing |
75.95
|
||
|
TB33N
|
Tele
Bridge-Vintage style 6 saddle nickel plated steel bridge,
with screws 2 3/16" spacing. 4 mounting screws included.
|
32.95
|
||
|
TBS122N
|
Set
of 6 nickel replacement saddles for Tele bridge with springs and
screws. Round with slot in center. |
19.95 |
||
|
TB33G
|
Tele
Bridge-Vintage style 6 saddle gold plated steel
bridge, with screws 2 3/16" spacing. 4 mounting screws included. |
42.95 |
||
|
TB5034C
|
Tele
bridge for import-top loading with 6 round steel saddles, chrome. 3
mounting 2 1/8" string spacing. |
24.95
|
||
|
TB5034CA
|
Lightly
aged Tele bridge for import-top loading with 6 round steel saddles,
chrome. 3 mounting 2 1/8" string spacing. |
39.95
|
||
|
TBM63C
|
Chrome
bridge mounting screws #8 1" long, flat phillips head set of
4 for Tele. |
$1.95 |
||
|
TBM624S
|
Nickel
oval slot head mounting screws for Tele bridge, set of 4
|
$2.45 |
||
|
TGS375
|
Tele
neck pickup mounting screws, phillips head for under pickguard - 4 pieces  |
1.95 |
||
|
TPM634
|
3
Slot head screws for Tele bridge pickup mounting |
$1.95 |
||
|
TS-SSn
|
Replacement
nickel/stainless slot head screws for Tele-Includes 4 slotted neck plate
screws, 8 tuner screws, 6 bridge/strap button screws, 12 pickguard screws
(use two for control plate) and two switch screws. |
$13.95 |
||
|
TS-TSSNA
|
Aged
Replacement nickel/stainless slot head screws for Tele-Includes
4 slotted neck plate screws, 8 tuner screws, 6 bridge/strap button screws,
12 pickguard screws (use two for control plate) and two switch screws.
Note* tuner screws can't be aged due to their small size-they will strip
out.
|
$19.95 |
||
| About String ferrules: The no lip ferrules would require drilling the string holes in the body to 3/8". The Fender brand and our #087 need 5/16" holes in the body. We flush fit them by using a tapered drill bit to enlarge just the top of the hole. | ||||
|
99-4917
|
Fender
brand chrome string ferrules- Set of 6, American series. |
11.95 |
||
|
99-4918
|
Fender
brand Original String Ferrules-6 pieces, vintage style nickel, for
Tele bridge or hardtail (non-trem) Strat bridge |
11.95
|
||
|
99-4918A
|
Aged
Fender brand Original String Ferrules-6 pieces,vintage style
nickel, for Tele bridge or hardtail (non-trem) Strat bridge. Aged
to look old. |
17.95 |
||
|
SF087N
|
String
Ferrules-6 pieces, nickel for Tele bridge or hardtail (non-trem)
Strat bridge 5/16" |
6.95
|
||
|
SF187N
|
Nickel
no lip string ferrules, set of 6. These will fit flush into a 3/8"
hole  |
7.95
|
||
|
SF087G
|
String
Ferrules-6 pieces, gold 5/16" |
9.75 |
||
|
SF087GA
|
String Ferrules-6 pieces, aged gold 5/16" | 15.75 |
||
|
SF087B
Pics & Info |
String Ferrules-6 pieces, black for Tele bridge or hardtail (non-trem) Strat bridge 5/16" Closeout-see Clearance page |
|
||
|
Tuning
Machines for Strat and Tele Double
line, with the "Kluson Deluxe" stamped twice on each tuner
casing, was used from 1964-1967. |
||||
|
SD9105MN
 |
Tuning
Keys -Authentic Kluson® replacement, 6-in-line, nickel, screws
included. Used by Fender from 1957 to 1964. List $60 See Tuning Keys page for more selections |
56.95 |
||
| .
SD9105MA
Pics & Info |
Aged
Tuning Keys -Authentic Kluson® replacement, 6-in-line, nickel,
screws included, "aged" to appear
old |
76.95 |
||
|
CPT-2058
|
Tele
Control Plate-Fender vintage style chrome, with two mounting screws. |
17.95 |
||
|
CP-2058A
|
Aged Tele Control Plate-Vintage style chrome, "aged" to look old, with two mounting screws. | 24.95 |
||
|
CPT-650G
|
Tele Control Plate-gold with two mounting screws | 27.95 |
||
|
CPT-650GA
|
Aged Tele Control Plate-gold, aged to look old | 34.95 |
||
|
99-4912
|
String
Retainer-round Fender brand vintage Tele, nickel
 |
4.95 |
||
|
SG730TN
|
String
guide-round for Tele, nickel (1) with screw |
2.95 |
||
|
SG730TNA
|
String guide-round for Tele, aged nickel (1) with screw | 4.55 |
||
|
SG730TG
|
String guide-round for Tele, gold (1) with screw | 3.95 |
||
|
SG730TGA
|
String guide-round for Tele, aged gold (1) with screw | 5.95 |
||
|
JP275TC
Pics & Info |
Jackplate-Chrome
input cup for Tele-style body. Includes clip. |
3.00 |
||
|
JP275TCA
Pics & Info |
Jackplate-Chrome input cup for Tele-style body, "aged" to appear used. | 6.95 |
||
|
JP275TNI
Pics & Info |
Jackplate-Chrome input cup for Tele-style body-installed in a body you purchase from us. Price is for input cup plus installation. | 6.95 |
||
|
JP275TAI
|
Jackplate-Chrome input cup for Tele-style body, "aged" to appear used, installed in a body you purchase from us. Price is for input cup plus installation. | 9.50 |
||
|
JP275G
|
Jackplate-Gold input cup for Tele-style body | 3.95 |
||
|
JP275GA
|
Jackplate-Aged Gold input cup for Tele-style body | 6.75 |
||
Gold Tele pickup
cover |
||||
|
ELECTRONICS |
||||
|
STL-1b
|
Seymour
Duncan bridge pickup-Broadcaster lead direct replacement for the
first Telecasters made in 1948. Duplicates the tone and appearance.
Cutting sound with a smoother reponse than Duncan's STL-1. The flat
rod magnets are aged with the exclusive Duncan-Aged process to duplicate
the magnetic strength of the originals. List $75 |
57.95 |
||
|
STR-1
  |
Seymour
Duncan neck pickup-Vintage Rhythm designed
to match the Seymour Duncan STL-1 or STL-1b vintage lead pickups in
both tone and output. Direct replacement for the original. Wiring
schematic and mounting screws included. List $75
Vintage-correct reproduction of 1950s Tele® lead pickup. Great for traditional country, country pop, surf, rockabilly, blues, and blues-rock. The rhythm (neck) pickup in a well-balanced vintage Telecaster compliments the bright twang of the lead pickup with a smooth and open tone, warm lower-mids and airy highs. Comes with a chrome-plated brass cover and waxed cloth hookup cable. |
57.95 |
||
|
STL-1
|
Seymour
Duncan Tele Vintage 54 lead Like the 1954 originals, this pickup features standard .187” diameter Alnico 5 pole pieces, raised for the “D” and “G” strings. The result is a twangy, bright and biting sound. Compared the STL-1b, the Vintage ‘54 has slightly reduced output and a bright and biting high-end detail. The STR-1 is the correct match for neck positing |
57.95 |
||
|
APTR
11204-04 |
Seymour Duncan Alnico II Pro Rhythm for Tele | 57.95 |
||
|
APTL
11204-03 |
Seymour Duncan Alnico II Pro Lead for Tele | 57.95 |
||
|
11024-21
|
Seymour
Duncan Antiquity Handmade, aged vintage 1950's replacement-Telecaster
neck |
84.95 |
||
|
11024-22
|
Seymour
Duncan Antiquity, aged vintage 1950's replacement-Telecaster
bridge List $121 |
84.95
|
||
|
11024-2T55
2 pickup set |
Seymour Duncan 1955 Antiquity pickup set, aged vintage 1950's replacement-Neck pickup & 1955 telecaster bridge pickup, with raised "D" and "G" - Highly Recommended - Excellent performance in our in-house tests. Raised poles help balance the string volume and gives a fuller sound. #26 & 27 List $242 | $168.95 |
||
|
11024-26
|
Seymour Duncan Antiquity, aged vintage 1950's replacement-1955 Telecaster neck List $121 | 84.95
|
||
|
11024-27
|
Seymour Duncan 1955 Antiquity, aged vintage 1950's replacement-1955 telecaster bridge pickup, raised "D" and "G" - Highly Recommended - Excellent performance in our in-house tests. Raised poles help balance the string volume and gives a fuller sound. List $121 Shown with our aged bridge, not included.
|
84.95 |
||
|
11024-32
|
Seymour Duncan Antiquity II, Tele Twang neck List $121 | 84.95
|
||
|
11024-33
|
Seymour Duncan Antiquity II, Tele Twang bridge List $121 | 84.95
|
||
|
TPC-CA
|
Aged
chrome Tele replacement cover for neck pickup. Has three tabs for attaching
to pickup, one is for the ground. |
18.95 |
||
|
GWKitT
|
Tele Wiring Kit-Includes: Switchcraft 1/4" jack, 2' feet each of black and white vintage style cloth covered wire, 3-way switch w/screws, black switch knob, two 250K CTS pots, .02 cap. The pots in this kit are full size. If you are replacing electronics in a guitar with the small "dime" pots, you will need to either ream out the holes a little in your existing control plate, or buy a Fender replacement control plate. |
34.95
|
||
|
GWkitGS
|
Tele Deluxe style Wiring Kit for 2 humbucker guitar-Includes: Switchcraft 1/4" jack, 4' feet braided, sheilded, vintage style wire, medium length 3-position Switchcraft switch w/screws #67, black switch knob, four 500 CTS standard shaft pots (#EP086) two .02 caps. |
39.95 |
||
|
BP2271C |
Fender
Bridge Cover-Chrome for Tele-style bridge  |
17.95
|
||
|
BP2271CA
|
Bridge
Cover-Chrome for Tele-style bridge, "aged" to appear used
|
34.95 |
||
|
BP481TG |
Bridge
Cover-Gold for Tele-style bridge List $40 |
35.95
|
||
|
See
Electronics page for pots, caps,
3-way switch, etc.
|
||||
|
SK99-4936
|
Fender brand Original Tele switch tip, black (1 pc)
|
3.95
|
||
|
SK713B
|
"High hat" or "top hat" switch knob: Black
(1) for Tele fits USA switch |
1.95
|
||
|
SK714B
|
Round
switch knob: Black (1) for Tele fits USA switch  |
1.50 |
||
|
SK714W
|
Round
switch knob: White (1) for Tele fits USA switch  |
1.50 |
||
|
SK714C
|
Round
switch knob: Cream (1) for Tele fits USA switch  |
1.50 |
||
|
SK714SV
|
Round
plastic switch knob: Silver (1) for Tele fits USA switch  |
2.00 |
||
| BS206S | Slotted
bone nut, curved bottom for Fender necks. 1 11/16" x 1/4" x 1/8"  More nuts on the Strat page and the Closeout page. |
5.25
|
||
|
PICKGUARDS
for Tele®
Complete list below except Lefty About Aged or Distressed pickguards: The aged pickguards listed below were added to compliment our distressed bodies. If you choose to purchase one of our distressed pickguards or have a very old pickguard, please note the following: Don't use guitar polish or other liquids on vintage or aged plastic or hardware. Polish should be sprayed on a soft cloth, not directly on the guitar. Aged plastics will acquire grey smudges if hands are dirty, sweaty or wet. We recommend having clean, dry hands when installing a pickguard, pickup covers or knobs or doing any work on the guitar. Our aged pickguards are not recommended for people whose hands sweat excessively when playing guitar. 
Color Comparison-from the left--3 ply aged/distressed white, 1 ply white, 3 ply white (standard non-aged) |
||||
|
PG564MG
|
Pickguard-Tele,
mint green 3-ply (g/b/g) 8 screw holes. No pickup mounting scews.
List $20 |
16.95 |
||
|
PGT564MGAD
|
Mt
Green Tele pickguard, deglossed and lightly aged, 8 screw holes
3-ply includes 8 rusty pickguard screws. |
29.95 |
||
|
PGT99-2154
|
Fender
brand mint green pickguard for Standard Tele, 3-ply (g/b/g)
8 screw holes. Two pickup mounting scews. List
$40 |
29.95 |
||
|
PG2152T
|
Fender brand 4 ply Tortoise pickguard. 8 screw holes. List $50. |
39.95 |
||
|
PG563T
|
Pickguard-Tele,
Tortoise, 3-ply (t/w/b) 8 screw holes. List $30 |
26.95 |
||
|
PG563R
|
Pickguard-Tele,
vintage red tortoise, 3-ply (rt/w/b) 8 screw holes. List $35 |
32.95 |
||
|
PG591MB
|
Pickguard-Tele, matte black 1-ply, 5 screw holes | 14.95 |
||
|
PGT559BB
|
Tele Bakelite material pickguard-Black, 5 screw holes 1 ply. List $37 | 33.95 |
||
|
PGT560-B23
|
Pickguard-Tele, Black (shiny finish) 5 screw holes 1 ply |
14.95
|
||
|
PGT2019
 |
Fender
brand Black '52 Tele pickguard. 1 ply, 5 screw hole. List $50 |
39.95 |
||
|
PGT560
|
Pickguard-Tele, white 5 screw holes 1-ply. About .07" thick |
14.95
|
||
|
PGT560
Prch
|
Parchment (off white) Tele pickguard, 5 screw holes 1-ply. List $20 |
16.95
|
||
|
PGT560AOF
|
Deglossed,
lightly aged
off white 1 ply, 5 screw holes, Tele pickguard. Includes
5 rusty pickguard screws.
|
27.95 |
||
|
See Lefty Parts page for more Tele pickguards |
||||
|
PGT562BLK
|
Pickguard-Tele, black 8 screw holes 3-ply (b/w/b) |
15.95
|
||
 3 ply 8 screw hole Tele pickguards, from left to right White, Parchment, Vintage Cream, Aged, Deglossed Off White. Note, the first 3 are shown with the protective clear cover intact. They will be shinier than the aged deglossed pickguard when the clear shield is removed. The aged pickguard includes a truss rod divet and aged pickguard screws. |
||||
| Pickguard-Tele, white 8 screw holes 3-ply (w/b/w) |
15.95
|
|||
|
PGT562P
|
Tele
Pickguard, Parchment (off white) 8 screw holes 3-ply (p/b/p) |
15.95
|
||
|
PGT562AOF
Pics & Info |
Pickguard-Tele,
deglossed and lightly aged off white, 8 screw holes, 3-ply, includes
8 rusty pickguard screws. Has truss rod divet above the neck pickup
cavity.  |
29.95 |
||
|
PGT562VC
|
Tele
Pickguard, Vintage cream, 8 screw holes 3-ply (vc/b/vc) |
15.95 |
||
|
PGT562-CP
|
Pickguard-Tele,
Cream Pearloid (cp/b) 8 screw holes. Looks like an aged white pearloid-very
nice color. Back is black. |
32.95
|
||
|
PGT562-CPA
|
Pickguard-Tele,
Cream Pearloid (cp/b) 8 screw holes. with rusty screws included, aged
screw holes and darkened, aged outside edge. The Pearloid top is very
similar in color to the 1968 pickguard shown on the left. This replacement
pickguard is not deglossed. The original (left) is still somewhat shiny. |
44.95
|
||
|
PGE567W
|
Pickguard for Esquire, White 1 ply, 5 screw holes | 15.95 |
||
|
PGE567-P
|
Pickguard for Esquire, Parchment (off white) 1 ply, 5 screw holes | 16.95 |
||
|
PGE567-WA
|
Lightly
aged and deglossed Pickguard for Esquire, white (off white) 1 ply,
5 screw holes. Includes 5 rusty screws. |
28.95 |
||
|
PGE567-b
|
Pickguard for Esquire, Black 1 ply, 5 screw holes | 15.95 |
||
|
PGE567-BB
|
Pickguard
for Esquire, Black Bakelite 1 ply, 5 screw holes. List $37. The
protective coating is peeled back on the top right hand side. |
8
33.95 |
||
|
PGT9562-blk
|
Pickguard for Tele with humbucker pickup cutout-Black 3 ply | 15.95 |
||
|
PGT9562-wht
|
Pickguard
for Tele with humbucker pickup cutout-White 3 ply |
15.95 |
||
|
PGT9562-whtA
|
Aged white 3 ply Pickguard for Tele with humbucker pickup cutout-includes rusty pickguard screws. | 28.95 |
||
|
PGS001
|
Pickguard Screws-1 dozen, nickel phillips head | 1.95 |
||
|
PGS01A
 |
Pickguard Screws-1 dozen, aged nickel, phillips head for Fender type guitars
More screws, including slot head on the hardware page |
3.95 |
||
|
all pearl capped dome knobs
fit Tele |
||||
|
MK99-2056C
|
Fender brand Original vintage Tele dome knob set, chrome (2 pcs) List $20 | 17.95
|
||
|
MK99-1366C
|
Fender
brand Tele/P bass barrel knobs, chrome (2 pcs)  |
17.95 |
||
|
MK-110C
|
Knob set-Chrome dome knobs for Tele, P or J-Bass (2) with set screw, fits USA solid shaft pots. 13/16" tall x 3/4" | 9.50 |
||
|
MK-110N
|
Knob set-Chrome dome knobs for Tele, P or J-Bass (2) with set screw, fits USA solid shaft pots | 9.50
|
||
|
MK-110NA
|
Lightly aged Knob set-Nickel dome knobs for Tele, P or J-Bass (2) with set screw, fits USA solid shaft pots-"aged" to appear used. | 15.95 |
||
|
99-2056-G
|
Fender
brand gold dome knobs, with set screw. List $23 |
19.95 |
||
Chrome
barrel knobs, (1) vintage flat top style, with set screw, fits USA
solid shaft pots 3/4"
x3/4" |
||||
|
MK115vC
|
Chrome
barrel knobs, (1) vintage flat top style, with set screw, fits USA
solid shaft pots3/4"
x3/4" |
4.95
|
||
|
MK115vCA
|
Lightly aged Chrome barrel knobs, flat top (1) with set screw fits USA solid shaft pots (Tele, P or J Bass) |
$7.95
|
||
|
MK115vG
|
Gold
barrel knobs, (1) vintage flat top style, with set screw, fits USA
solid shaft pots |
$7.50
each |
||
|
MK115vGA
|
"Aged" Gold barrel knobs, (1) vintage flat top style, with set screw, fits USA solid shaft pots |
$10.50
each |
||
|
#TE56-10OW
Body
is routed for standard 2 pickup Tele, if you'd like to make a change
in the future.
|
GRGuitars
bench made alder aged Oly white lacquer finished Tele/Esquire style
guitar. Amber lacquer finished maple/ebony fingerboard
neck, 21 medium frets, 7 1/4" back radius, measures about .85 at
1st fret, .95 at 12th fret. Neck is Fender licensed, with our finish.
Fender logo bridge with 3 threaded saddles. High hat switch knob, 3
way switch,
2 CTS 250k solid shaft pots, 3 caps, 1 resistor, wire, input cup with
clip and 1/4" jack. Aged flat top barrel knobs, aged nickel strap
buttons. Seymour Duncan Broadcaster pickup. Aged authentic kluson tuners.
Aged numbered neck plate, aged nickel Fender brand string ferrules,
aged input cup. Distressed white 1 ply pickguard. 
    |
Reg price $1075
Now just $899
Will be shipped with neck unscrewed from body unless you prefer to buy a case. Shipping & Insurance about $40 email grguitars@msn.com with zip code for shipping quote. |
||
|
TN2804U
|
Unfinished
Maple/Rosewood Fender licensed Tele neck. 21 tall frets, 1 5/8"
nut width, 10" radius. $170.00   |
$144
|
||
|
PK324B
|
Set
of 4 black plastic "Witch Hat" knobs, 2 tone, 2 volume.
fits USA shaft pots. |
10.95
|
||
|
SINGLE
CUTAWAY: Hardware for building a single cutaway guitar or if you
are repairing an old Tele®. SChrd10 Neck plate, with screws #NP600Tuners, 6 in line Kluson style #TK780NString Guide for Tele-style guitarBridge-vintage 3 brass saddle Tele-style #TB020NTele jack input cup #JP275TNControl plate-chrome #CP20589 pickguard screws2 strap buttons, 2 screws #SB6702 Chrome knobs #MK115v10 barrel for the aged kit or chrome dome for the standard (as new) 6 string ferrules #SF087N |
||||
This
one has 2 1/8" spacing.
Gotoh
brand chrome plated brass Tele bridge with rectangular saddles,
4 mounting screws (mounting screw holes measure 2 9/16" center
to center of outside holes.)
List $121